With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

craftsman


Belt drive table saw motors run on a pulley system, most of the time some power is lost through this system, but belt drive blades can cut through thicker timber and hardwoods. They can produce power of around 3 to 5HP and thanks to the motor being mounted further away from the blade with belt drive, the motor will last longer as less dust will get into the motor. One thing to consider though is that belt drive will be in general more expensive and are normally found on heavy cabinet type saws, so this must be considered when working out your budget.
Balancing heavy-duty durability and lightweight design, this machine proves that good things can come in small packages. While buyers are overall happy with their purchases, they do seem to all agree on one thing: the DEWALT DWE7480 may be an overall investment, but it could seriously do with a miter gauge replacement. Buyers report replacing its inaccurate, plastic gauge for a solid, more detailed one.
Inspect your wood carefully to make sure that you are able to maintain a safe working environment and are able to complete high quality work. Now that you’ve got these things in mind there are only a few more things you’ll need to remember before you’re ready to get to work! First, remember that the blade spins towards you, the operator. This means that you’ll always want to feed the wood to the machine by pushing it towards the blade and away from you.
There are two types of motors used in table saws: universal motors and induction motors. With a universal motor, the power source is linked directly to the blade, providing a whole lot of power. The downside is that these models are generally quite loud. Induction motors, on the other hand, are connected to a belt that then transfers power to the blade. As a result, you get quieter operation and the ability to cut dense materials. The downside is that these models require more preventive maintenance, as you have to adjust the belt’s tension periodically. 

How big a table saw is, is determined by the largest blade the saw will hold. 8” blades are the smallest that should be used for any home workshop. You can get blades in 9”, 10”, and 12” sizes as well. Most workshops will not really need the 12” blade as this has a very deep cut capability, but for construction firms and larger, commercial shops, the 12” comes in handy.

Although both DEWALT DW745 and DWE7480 have similar features like 120 voltage power supply, 10 inches blade diameter, 5/8 inches arbor size, 2.5 inches dust collection port and similar maximum cut depth, there are few differences between them. Modular guarding systems are available in both these models which can give you efficiency while setting up the tools.
The blade material is another important factor to consider when shopping for the best saw blade for your table saw. When it comes to choosing the right material, there are two aspects to consider. You should know about the material of the plate as well as the material used to make the teeth of the blade. All saw blades are not created equal. There are cheap saw blades that won’t deliver the results you expect from your woodworking projects. Don’t scrimp on the blade when you have invested a significant amount of money on a quality table saw. Some of the highest quality saw blades are made from laser-cut steel and the teeth are made of C4 grade carbide using microscopic grains.
The Bosch 4100-09 offers many advanced features, making it a very capable table saw for woodworking. The air-filled wheels and gravity rising stand makes this table saw functional and lightweight. Set up and tear down of the table saw is a breeze. This technology allows the table saw to be moved from place to place, even over the most rough and challenging areas of the work site. The 4100-09 weighs 39 pounds, making it the perfect portable table saw. Although it is lightweight, it is very durable and stable.

router table


How and where do you intend to use your table saw? If you plan to take it from one worksite to another then you must use a job site table saw A job site saw is portable, compact and usually has its own stand and may or may not have wheels. Stationary table saws are also called bench top saws because these don’t come with a stand. These rely on a table or a workbench to support the weight of the saw. There are also cabinet table saws which are heavy duty saws that are mounted in a metal or cast-iron cabinet. These saws are very heavy but are usually made with moving wheels and complete cutting features.

The Dewalt DW745 is a well-engineered portable jobsite table saw that will cater to a wide range of projects. Whether you’re a professional or an amateur this fantastic 10″ compact saw has been thoughtfully designed for the end user. This shouldn’t come as a surprise if you’ve used Dewalt tools in the past because designing heavy-duty power tools is what Dewalt is known for and thankfully, the Dewalt DW745 is no different.
The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.
The old designs of table saws did not have the angled capability that newer models have now with their ability to have the blades angled at 45 and 90 degrees. Before these upgraded styles, the table itself had to be tilted which made cutting extremely unsafe. The new styles that accommodate angling the blade for the beveled cuts make things much easier and safer for the user.
It’s best to avoid this issue entirely by making sure that there is no material that could catch on any of your work material and jeopardize your health or safety. Now that you’ve got the basics down for how to properly dress for working with your table saw, you’re ready to inspect your equipment. To start with, you’ll want to make sure the table saw is unplugged before examining it and making sure you’re good to go.
Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
Another excellent choice for the hobbyist or at-home handyman, the SKIL 3410-02 10-Inch Table Saw is a great value, giving you a durable build and quality performance at a wallet-friendly price. It doesn’t have the same brand recognition as some of the more expensive options on this list, but reviewers love this machine and say that it’s perfect for woodworking and DIY projects.

best table saw for hobbyist


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

craftsman


None of your woodworking projects will go wrong if you have the best table saw for your individual needs. Hopefully, with the above table saw reviews, you now have enough info to find your right fit. Although a comparison between the DWE7480 vs DW745 shows almost the same great features, our top pick is the DW745. Although it is small for some people, it is durable, has good speeds, is powerful, and most importantly, it is budget-friendly.
There are two types of motors used in table saws: universal motors and induction motors. With a universal motor, the power source is linked directly to the blade, providing a whole lot of power. The downside is that these models are generally quite loud. Induction motors, on the other hand, are connected to a belt that then transfers power to the blade. As a result, you get quieter operation and the ability to cut dense materials. The downside is that these models require more preventive maintenance, as you have to adjust the belt’s tension periodically. 

chicago electric table saw

×