One thing manufactures noticed over the years was that when people used the splitters in normal straight cuts it worked well but it’s biggest downfall came when contractors wanted to do cross cuts. What would happen is that people would remove the splitters to make the cross cuts but then forget to fixed them back in place. One brilliant table saw safety feature is the riving knife. The Riving knife is attached directly to the blade mechanism, this allows it to always be attached not matter where or what angle the blade is.
At a compact 45 pounds, the DEWALT DW745 Compact Jobsite Table Saw is the lightest table saw in our review. The saw's portability doesn't mean that ripping size is compromised, though. Thanks to extending fence guides, you've got 20 inches available. Depth of cut is on par with many bigger machines: at 90 degrees, it's 3 1/8 inches. At 45 degrees, it's 2 1/4 inches. Power comes from a 15-amp motor with a no-load speed of 3,850 RPM. This is ample enough for serious DIY projects and light-duty construction site work.

best table saw under 500


A splitter is a piece of metal that keeps the blade from binding in whatever material you are cutting if the saw kerf starts to close up. The splitter is vertical and sits directly behind the blade. This plays a big part in preventing kickback and should be mounted on the motor assembly so it rises and falls with the saw blades movements. You can also get splitters that can be adjusted to fit the width of the kerf.

10 inch table saw blade


The model BS5205 4.5 inch band saw is ETL Certified and offers 3 speeds. Engineered for cutting ferrous and nonferrous metals with speed, efficiency and durability. A Solid cast iron saw head frame and vise that opens to 6 inch. Featuring a heavy-duty steel stand with tool shelf plus wheels and handle for easy transport. The BS5205 has a vise that swivels up to 45 degrees, as well as a throat depth of five inches, enabling you to gain more flexibility and control over each project. The Miter gauge allows 90 degrees to 45 degrees cuts. You can set the speed at 80, 120, and 180 feet per minute--whichever best suits your materials and job. It's 1/2 HP motor can easily cut through aluminum to steel.

best table saw


One thing you must be aware of with a contractor saw is the fact that they can be a lot more difficult to move from job to job, this is something that must be considered before purchasing. For thicker and harder type woods a cabinet table saw maybe the best way to go, especially for the long-term benefits, but for the average mid-sized contractor it’s still a great option. Read More

The DEWALT DW745 is a smaller version of the DEWALT DWE7491RS. It’s still a good saw in its own right. It comes with a 15-amp motor, just like the larger unit, though it can only handle rips of up to 20 inches. You’ll experience the same power and consequently, the same speed as the larger model, though you can’t cut pieces as large. This model is also meant to be moved, and while it doesn’t have wheels, it has a metal roll cage that will help it survive travel without taking any damage.

best table saw blade for melamine


This particular table saw features a high-torque motor of 15-amp, which is suitable for cutting hardwoods as well as the pressure treated timber. This is also aided by a speed of 4800RPM. The tool also features a rack, as well as a pinion telescoping fence rail that creates accurate, meticulous, and smooth fence adjustments. You can flip over the fence to make small and precision rip cuts.
Hello, Thank you for your comment. We have been a full line Jet Distributor for over 25 years. We do sell the Jet table saws but for some reason or another they did not make the list. Jet’s Table saws are high quality and offer a great value but it seems that in all cases we looked at there was a different unit that performed slightly better. This does not mean that the Jet table saws are bad, it just means that in our categories they didn’t come out in the #1 position.

best table saw under 300


Pre-calibrated right out of the box, Kreg’s miter gauge is a blessing for the impatient among us. The folks at Kreg know their customers don’t want to waste time preparing their tools — they want to use them! That’s why the KMS7102 boasts positive stops at a variety of the most common angles: so you can begin using your brand new miter gauge straight away.
It’s not until you get a bunch of saws side by side in the shop that you start to see the difference between a $300 saw and a $500 saw. While the motors are all 15-amp, the more expensive saws have features like soft start to prolong motor and gear life, electronic feedback to maintain blade speed and gearing to maximize torque. If you look under the saws, you’ll see that the more expensive saws also have much beefier motor carriages and better-quality blade-adjusting mechanisms.

circular table saw


Hello, Thank you for your comment. We apologize for any issues our Top Table Saws of 2018 blog post has caused. It was not written to be a comparative review of the different saws but a list of the top saws that we are currently selling. It would be unfair to compare performance of a portable jobsite table saw to a industrial cabinet saw and then also compare them on price. If you would like to read a very good comparative post we suggest you check out ProToolReviews.com. They are not tied to any manufacturers and have a very unbiased opinion.
I appreciate the helpful comparison of the best table saws. I’m fairly new to woodworking, and until recently I was using an old table saw that used to belong to my dad. Long story short, it’s no longer usable, and so I’m looking for a good table saw to buy that’s beginner-friendly. I have my eye on the DEWALT DW745 – evidently it’s really popular and does a great job. I’ve taken a look at some other sites for more ideas. Your guide here is great. What is your opinion on the DW745?

best table saw on the market


Once you’ve made sure that the table saw is unplugged and there aren’t any extra materials in your workspace, you should turn your attention to the miter slot. See also related: Top 10 Miter Saws here. You’ll want to make sure that the miter (click here for sliding miter saws) slot is parallel to the blade. It is important that all measurements are precise and exact – nothing short of parallel will do. Once you’ve measured the blade and the miter slot, you’ll need to check the fencing as well.

best jobsite table saw 2018


Lack of mobility is the cabinet saws major drawback. Some cabinet saws need proper electrical wiring set up and often weigh a huge amount because of cast iron table tops and full cabinet like stands. But if your setting up a new wood shop or have a work space or wood shop of your own then there is no better investment you can make other than purchasing a cabinet table saw.

best table saw for fine woodworking


The model BS5205 4.5 inch band saw is ETL Certified and offers 3 speeds. Engineered for cutting ferrous and nonferrous metals with speed, efficiency and durability. A Solid cast iron saw head frame and vise that opens to 6 inch. Featuring a heavy-duty steel stand with tool shelf plus wheels and handle for easy transport. The BS5205 has a vise that swivels up to 45 degrees, as well as a throat depth of five inches, enabling you to gain more flexibility and control over each project. The Miter gauge allows 90 degrees to 45 degrees cuts. You can set the speed at 80, 120, and 180 feet per minute--whichever best suits your materials and job. It's 1/2 HP motor can easily cut through aluminum to steel.

Modern-day manufacturers such as DeWalt and Bosch have started offering onboard storage on their job site table saws and it’s something I seriously cannot live without anymore. The DWE7491RS is no different, this job-site table saw comes with onboard storage for just about every component except for extra blades, which is kind of a bummer. Competitors such as the Bosch 4100-10 do come with the ability to store extra blade. 

best table saw 2015


The main problem with cross and miter cuts is an incorrect miter adjustment, so make sure that you check this. It is often a good idea to make a test cut on a discarded piece of wood first. Working against the miter edge can be tricky because it doesn’t have a very long edge, so the wood can slip about. You can correct this by extending the edge with a straight strip of wood. Attaching a piece of sandpaper to the edge of this wood will help to increase grip.

The scales that indicate the width of cut fall into one of two categories: continuous and separate. Of the seven we’re reviewing, DeWalt, Ridgid and Rockwell are continuous. You simply line up the fence with the desired measurement. The other four best table saw options—Bosch, Craftsman, Ryobi and Porter-Cable—require you to lock the fence in a specific position on fully extended rails, and read the dimension on a separate scale. We prefer the continuous scales and really like the tape measure–type scale on the Ridgid.


Hi Paul, Thank you for your comment. As stated in our reply to Mr. Lee this post was not intended to serve as a review on these table saws but instead it was to inform customers as to what our popular table saws are. Each saw has its features and benefits that are more important to different customers and this information will allow the customer to quickly see what are the popular units are.
Ironically, it’s the more experienced carpenters that are more likely to get injured whilst using a table saw. Research has shown that most injuries are reported by carpenters with more than 18 years of experience. The reason for this is complacency, people tend to become more relaxed over the years. So it’s important to maintain a healthy respect for the machine that you’re working with and never forget the possible danger that you face, no matter how proficient you become.

hercules table saw

×