Contractor saws weigh quite a bit more than portable saws, averaging between 150 and 350 pounds, but are still somewhat portable. They have a heavier, cast iron table top, and a motor that is usually more powerful than a jobsite saw. Even so, they’re within prices affordable for more committed hobbyists. Contractor saws can range between $800 and $2,000. They’re good for basic cutting tasks, as well as making home furniture and cabinetry work.
For those looking for something small, these benchtop table saws are just right. Used by contractors who need portable table saws, they’re suitable for quick placement in vehicles and setting up at project sites. Typically, the unit weighs less than 65 pounds and comes equipped with a universal motor. Depending on the model, some come with handy fences. A fence is the part of a saw mounted parallel to the blade, ensuring safe and fast multiple rip cuts.
How do you know which table saws are the best on the market? With so many table saw choices, it’s hard to know which one is the best fit for you and your woodworking needs. Not for long. We’ve taken the leg work out by doing all the measuring, tracking, and researching for you. We’ve compiled year-over-year performance and pricing information for over 3 years to help you choose the table saw that is ideal for you and your project. Search no more, find the best saw for you below.
Belt drive table saw motors run on a pulley system, most of the time some power is lost through this system, but belt drive blades can cut through thicker timber and hardwoods. They can produce power of around 3 to 5HP and thanks to the motor being mounted further away from the blade with belt drive, the motor will last longer as less dust will get into the motor. One thing to consider though is that belt drive will be in general more expensive and are normally found on heavy cabinet type saws, so this must be considered when working out your budget.
Pre-calibrated right out of the box, Kreg’s miter gauge is a blessing for the impatient among us. The folks at Kreg know their customers don’t want to waste time preparing their tools — they want to use them! That’s why the KMS7102 boasts positive stops at a variety of the most common angles: so you can begin using your brand new miter gauge straight away. 

best table saw cover


Kickback is probably more dangerous than cutting yourself with the blade because it can happen so easily and without notice. Kickback happens when the wood becomes jammed and is forced back toward you. This is not a nice experience and often results in pretty serious injuries. Table saws are fitted with a riving knife and often an anti-kickback pawl, make sure these are fitted correctly.

best table saw review 2017


The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.

the best diy table saw


Bosch’s 4100-10 Worksite Table Saw is a sure win. Bosch never fails to impress us, and this table saw is no exception. It’s a 10 in. saw with a 25 in (right) rip capacity and a 47 degree left bevel. This Bosch table saw is powered by a 15A motor that reaches top speeds up to 3,650 RPM. Another feature we appreciate: its constant response circuits which continuously adapt the speed under load, giving you a continuous blade speed.
There is a variety of table saw accessories to keep in mind. Just some of the most common are table extensions, on and off switches, wheels, onboard storage and dust collection features. Additional blades, wrenches, and tables are also a must. Remember that a table saw set is better than a bare tool because you will end up spending more as you buy accessories piece by piece.
Hello, Thank you for your comment. We have been a full line Jet Distributor for over 25 years. We do sell the Jet table saws but for some reason or another they did not make the list. Jet’s Table saws are high quality and offer a great value but it seems that in all cases we looked at there was a different unit that performed slightly better. This does not mean that the Jet table saws are bad, it just means that in our categories they didn’t come out in the #1 position.
Table saw flesh sensors are a brilliant and clever piece of engineering. Sawstop revolutionised the industry when they came up with this technology. Human skin is a good conductor of electricity where is wood isn’t. So, the system works by passing an electric current through the table saw blade its self and when it’s cutting wood it’s fine as there is no conductivity between the wood and the blade but as soon as it hits human skin and becomes conductive it triggers an electric brake that stops in the blade in only 0.02 seconds. You may end up with a small cut but at least you won’t lose your finger or worse. There are quite a few different versions now on the market so we would advise you to read plenty of table saw reviews and do you research into the different systems to find the best one for you.
It’s a little extra assembly work, but you’ll be grateful you did it later. The blade guard will keep your hands away from the saw and the splitter will help to reduce kickback from the machine and keep the wood flowing smoothly through the table saw. Additionally, if you’re working to cut thin boards, you should use a push stick or a push shoe to make sure your hands stay guarded while you work.
The TruePower 01-0819 may look like a miniature version of a table saw — and that’s because it is! Ideal for hobbyist modelers and DIYers looking to tackle minor jobs, the 01-0819, while lacking the same power and performance as its larger, pricier counterparts, is a steal at under $50. A must for any toymaker’s workbench, this bite-sized machine measures in at 8.5 x 7 x 7 inches, and while it lacks important parts like a guide fence, it gets basic 1/2-inch wood or foam board cutting jobs done, slicing through softer materials with ease.
I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.

best table saw for dado cuts


Contractor saws weigh quite a bit more than portable saws, averaging between 150 and 350 pounds, but are still somewhat portable. They have a heavier, cast iron table top, and a motor that is usually more powerful than a jobsite saw. Even so, they’re within prices affordable for more committed hobbyists. Contractor saws can range between $800 and $2,000. They’re good for basic cutting tasks, as well as making home furniture and cabinetry work.
Rockwell diverged from the crowd with this offering. For starters, the riving knife, anti-kickback pawls and blade guard are connected and remove as a unit. If you do remove them to make a non-through cut, you have to install the separate riving knife first. It’s not difficult, just different. This is the only saw with a right-tilting motor. We prefer left-tilting motors because it’s safer to make bevel cuts with the fence on the right side of the blade. There’s no port for attaching a vacuum cleaner, but there’s a large dust bag that does a good job of collecting sawdust. This saw cuts 3-9/16 in. at 90 degrees, 1/16 in. more than the next closest competitors, allowing you to rip a 4×4 in one pass. And like the Ryobi saw, it has a 30-in.-wide rip capacity.

best thin kerf table saw blade


It’s not until you get a bunch of saws side by side in the shop that you start to see the difference between a $300 saw and a $500 saw. While the motors are all 15-amp, the more expensive saws have features like soft start to prolong motor and gear life, electronic feedback to maintain blade speed and gearing to maximize torque. If you look under the saws, you’ll see that the more expensive saws also have much beefier motor carriages and better-quality blade-adjusting mechanisms.
The Bosch 4100-09 has some outstanding features, some of which are an improvement on the DeWalt. The only areas where it falls short of the DeWalt DWE7491RS is that it doesn’t have as high RPM and the rip capabilities aren’t as good either. The Bosch warranty of one year doesn’t quite match up to the DeWalt 3-year warranty. When all is said and done, it will really be a matter of personal choice, which one you prefer.
You’ll also want to be sure to check that the teeth of the blade are facing towards you since this is the direction that the wood is cut. Once you’ve made sure that the new blade is on properly you can put on the stabilizing parts and nut again. You’ll tighten the nut by putting the spanners on the same way you did before, however, this time you’ll push the spanner in your left hand away from you to tighten the nut instead of towards you. 

sawstop table saw


This table saw was completely redesigned and heavily improved in both safety measures and cutting capacity. For safety, DeWalt redesigned the red power switch to be electronic. It automatically resets the saw to turn off if the power is interrupted whatever the cause. I’ve heard some job-site horror stories regarding table saws who weren’t turned off properly so this redesign was very much needed.

A simple push stick comes standard with most saws. If you don’t have a push stick, it’s easy to improvise one by cutting a strip of plywood with a notch cut into one end that will enable you to press the wood down as you feed it through with the stick. While push sticks are very common, they are not the best tool for the job. This is because they don’t give you much directional control. You can ask any experienced carpenter and they’ll tell you that a push handle is far superior. A push handle allows you to press down on the wood that you’re cutting with the force of your hand, giving you much better control.
Upon unboxing, I wasn’t sure how much I cared that the built-in stand for this saw had wheels, but, boy, did I ever use them. If weather rolled in, the saw folded up and rolled to shelter in the garage. This was extremely convenient since I did my cutting in the driveway and stored the saw in the garage overnight. This maneuverability might be less useful to you if you plan to use the saw primarily in your garage where you could build or buy a semi-permanent stand rather than use the fold-up stand of this model. There is also on-board storage for the power cord and the loose parts such as the miter gauge and guards, making it completely self-contained.

Hello, Thank you for your comment. We have been a full line Jet Distributor for over 25 years. We do sell the Jet table saws but for some reason or another they did not make the list. Jet’s Table saws are high quality and offer a great value but it seems that in all cases we looked at there was a different unit that performed slightly better. This does not mean that the Jet table saws are bad, it just means that in our categories they didn’t come out in the #1 position.
This “review” is a giant nothingBurger. There is not one scrap of objective comparison between these saws. Because you sell them, they’re all great and will all zip right through “the hardest woods”. Bulll$hit. You did not test, compare, analyze, or use ANY of these saws. Re-hashinf manufacturer specs is a “Roundup” but it certainly is not a review. Typical sales pablum.
Table saws come in a variety of types, sizes, and shapes. As with every other tool, each has its unique features and list of pros and cons. Some of these tools are versatile and can achieve many tasks, but sometimes, finding the perfect one that meets all your needs can be a hassle. The following are things you should consider when you set out to buy your table saw.
In any Dewalt DWE7491RS review, it is clear that its drawbacks are minor. The throat plate lock could do with a bit of quality work. Also, if the dust port offered effective use with an accessory package or so, the dust cleaning would be much more ideal. The best part is, these issues are a trade-off, considering the overall performance. You can purchase it without hesitating. 

best table saw outfeed table


Bosch’s 4100-10 Worksite Table Saw is a sure win. Bosch never fails to impress us, and this table saw is no exception. It’s a 10 in. saw with a 25 in (right) rip capacity and a 47 degree left bevel. This Bosch table saw is powered by a 15A motor that reaches top speeds up to 3,650 RPM. Another feature we appreciate: its constant response circuits which continuously adapt the speed under load, giving you a continuous blade speed.
The Skilsaw worm drive table saw is considered the first ever brass-geared drive table saw. It is designed to provide maximum power and torque with its powerful 5.0 horsepower motor. This table saw is compact and portable with a solid construction. It has a 25-inch rip capacity and 3- ½ inches depth of material. The Skilsaw worm drive table saw has a self-aligning rip fence with an on-tool storage system. But despite being able to handle tough cutting jobs it stays lightweight at only 49 pounds. You can take the Skilsaw Portable Worm Drive Table Saw anywhere at any time.
In any Dewalt DWE7491RS review, it is clear that its drawbacks are minor. The throat plate lock could do with a bit of quality work. Also, if the dust port offered effective use with an accessory package or so, the dust cleaning would be much more ideal. The best part is, these issues are a trade-off, considering the overall performance. You can purchase it without hesitating.

best table saw outfeed table


A lot of the modern table saws nowadays will have a dust collection port where you can hook up a vacuum or extraction system to it. We would always recommend that you purchase a table saw with a dust port, always check the size of the port to make sure it fits with either your vacuum or your extraction system, or you can always modify something to make them fit.
As with most job-site table saws on the market, the DWE7491RS comes with a rolling stand included in the box. The wheels are pretty heavy-duty and capable of handling rough terrain and even staircases I experienced no problems with. Besides the easy transportation, you can store you saw upright in its folded position in your van to save space. The same goes for your workshop of course. 
The maximum rip to the right of the blade is 20” and 12” to the left, which is also very reasonable for a machine in this price range. You don’t get a stand and this obviously means no wheels either, so you’ll have to carry it around. Though it’s really not a heavy tool to move, weighing only 45lbs and this is despite the fact that is an incredibly durable piece of machinery with a metal roll cage. Adding to its compact portability, it has telescopic fence rails.

The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.
We spent over 30 hours researching and testing 10 different brands of table saws and found that maximum speed, cord length, and cut depth were most important. The DEWALT DW7480 table saw scored high marks in every category and is our top pick. This 48 pound table saw is perfect for using at home or taking with you to the job site. It has a powerful 15 amp motor and 24” rip capacity that makes it a favorite with everyone. The 2 ½” dust collection port allowed us to connect the saw to a shop vac and reduce the amount of dust that was in the garage.
The DEWALT DWE7480 Compact Job-Site Table Saw is obviously a very impressive tool and in our opinion, it’s the best on the market. That’s why we’ve chosen it as our top pick. The design is built with the contractor in mind and helps to ensure that you’ll never have to worry about the machine breaking down on you in the middle of a job or not being able to meet your demands. The saw is fairly light weight (coming in at only 53 pounds) and is powered by an impressive 15 amp motor that has a 20 inch rip capacity.
How big a table saw is, is determined by the largest blade the saw will hold. 8” blades are the smallest that should be used for any home workshop. You can get blades in 9”, 10”, and 12” sizes as well. Most workshops will not really need the 12” blade as this has a very deep cut capability, but for construction firms and larger, commercial shops, the 12” comes in handy.

best value table saw 2017


We love the Makita Contractor Table Saw for its convenient design and sheer power. The device is powered by a powerful 15 amp motor that enables it to work incredibly well and efficiently. The whole ensemble comes with a superior safety system, a miter gauge, a rip fence, and a 32 inch blade to ensure that you’re prepared to get going and get the job done as soon as you receive the package. We also appreciate the measures taken to protect the blade and machine during transportation like the case that encloses it underneath the table.

Going through hybrid table saw reviews, you can tell that accuracy is a bit less compared to cabinet saws and contractor table saws. This is no surprise as the other two are large with lots of operating power. Hybrid table saws are lightweight and can be moved easily from one location to another. The working space on the tabletop is less and cannot accommodate large pieces. They’re also a lot more wallet-friendly.
Balancing heavy-duty durability and lightweight design, this machine proves that good things can come in small packages. While buyers are overall happy with their purchases, they do seem to all agree on one thing: the DEWALT DWE7480 may be an overall investment, but it could seriously do with a miter gauge replacement. Buyers report replacing its inaccurate, plastic gauge for a solid, more detailed one.
It’s best to avoid this issue entirely by making sure that there is no material that could catch on any of your work material and jeopardize your health or safety. Now that you’ve got the basics down for how to properly dress for working with your table saw, you’re ready to inspect your equipment. To start with, you’ll want to make sure the table saw is unplugged before examining it and making sure you’re good to go.

craftsman 10in table saw

×