XThe accessibility of our website is taken very seriously. We strive to meet WCAG 2.1 AA Web Accessibility standards by routinely evaluating our website using automated evaluation tools and manual testing when required. As content changes we review and correct issues and are responsive to our users needs. If you encounter issues with our website, please report them so they may be corrected in a timely manner.

To be honest, ​this style and make of ​saw is a bit outdated. Designed to be the mobile alternative to the cabinet-style, the onset of new, portable table saws has made the contractor model a bit irrelevant. While they are more movable than a robust, heavy-duty table saw, you would do better to pick a mobile table saw if that is what you are looking for.

One of our favorite features of the device however, would have to be the load speed and maximum cutting depths. The DEWALT DWE7480 Compact Job-Site Table Saw can reach a load speed of 34,800 rpm and can reach a maximum cutting depth of 3 ⅛ inches when working at a 90 degree angle and 2 ¼ inches when working at a 45 degree angle. You’ll love the quick and accurate cuts you’ll be able to make while using this device - it will revolutionize the way you’re able to go about your job.
The continuous-read, tape measure–type scale is ingenious and easy to read, and Ridgid’s lifetime warranty covers it against breakage. The Ridgid saw has the most versatile miter gauge with holes and slots for mounting extensions and accessories. The designers have cleverly fashioned the stand to also serve as a left-side outfeed support for ripping plywood.

home depot table saw rental


This table saw was completely redesigned and heavily improved in both safety measures and cutting capacity. For safety, DeWalt redesigned the red power switch to be electronic. It automatically resets the saw to turn off if the power is interrupted whatever the cause. I’ve heard some job-site horror stories regarding table saws who weren’t turned off properly so this redesign was very much needed.
The Bosch 4100-09 10 Inch Table Saw is an expert tool that will be sure to impress its users with the reliable design and easy to use set up system. Our favorite feature was the gravity rise design that allows you to push the device around easily and focus more on getting the job done instead of wasting time trying to set up a complicated device. The tool is also coated in a powder coat that helps to improve the longevity of the device and features a collapsible design that is easy to fold up and down once you get to the job site.

best table saw for home diy


Modern-day manufacturers such as DeWalt and Bosch have started offering onboard storage on their job site table saws and it’s something I seriously cannot live without anymore. The DWE7491RS is no different, this job-site table saw comes with onboard storage for just about every component except for extra blades, which is kind of a bummer. Competitors such as the Bosch 4100-10 do come with the ability to store extra blade. 
A feather board is simply a piece of wood with slats cut into the end to resemble a feathered edge. A verticle feather board can be clamped at the correct height so that it presses down on the board that you’re cutting as it enters the blade. This is great for preventing kickbacks and for maintaining a constant depth whilst cutting dados and grooves. Remember that a feather board is not going to prevent a kickback due to bad working procedures or neglecting to use the safety equipment properly. It is merely an additional safety mechanism.
A table saw is among the most dangerous power tools in your workshop. If not operated correctly, table saws can cause lots of harm. Different types come with varied safety measures and features like flesh sensors, auto-reset switches, anti-kickback pawls, among others. Finding one with all these features comes at a price, but what is cost compared to your safety?

A simple push stick comes standard with most saws. If you don’t have a push stick, it’s easy to improvise one by cutting a strip of plywood with a notch cut into one end that will enable you to press the wood down as you feed it through with the stick. While push sticks are very common, they are not the best tool for the job. This is because they don’t give you much directional control. You can ask any experienced carpenter and they’ll tell you that a push handle is far superior. A push handle allows you to press down on the wood that you’re cutting with the force of your hand, giving you much better control.

table saw fence


Inspect your wood carefully to make sure that you are able to maintain a safe working environment and are able to complete high quality work. Now that you’ve got these things in mind there are only a few more things you’ll need to remember before you’re ready to get to work! First, remember that the blade spins towards you, the operator. This means that you’ll always want to feed the wood to the machine by pushing it towards the blade and away from you.


This is the smallest of all the table saws, typically weighing about 50 pounds or so and designed to sit on top of a table or workbench. Bench style table saws are usually made of steel, plastic and aluminum. They are good for light to medium duty cutting and would not be a good choice if you do a lot of cutting or if you have a professional business. Because it can be lifted by one person and moved around with relative ease, this type of saw is often called a portable table saw. Due to the size of these saws which measure approximately 19” x 27”, they are not designed to rip large pieces of wood. It is also not easy to make mitered cuts. You will notice that there might be more vibration when using this saw as compared to other, larger models. This is due to the lighter weight of the saw. Unfortunately, the vibration can affect the accuracy of the cuts you’re making.
Apart from the same standard kit that you get with the DeWalt DW745, you’ll also get a rolling stand and 2 blade wrenches. You have the option of also getting a 13/16” dado rail and saw blade combo pack for a few dollars more. For most people who want an affordable good quality table saw to use around the home for DIY and hobby projects, the DeWalt DW745 is an unbeatable option. However, the more serious hobby or professional carpenter will probably have to dig a bit deeper into their pockets and go for the DeWalt DWE7491RS.

This particular Dewalt table saw is our choice for commercial use. It features a 15-amp motor, which has an amazing speed of 4800 rpm. So, if you’re looking for a saw that incorporates high torque and power, this is one you shouldn’t pass up. The high number of spins in a minute can rip through several types of woods, which is why this model is ideal for different types of applications.
In portable table saw models, the motors are supported by trunnions mounted to the underside of the table. The resulting vibration reduces accuracy. These trunnions are usually made of lightweight steel or aluminum, which are susceptible to wear. And because these saws are small, cutting full-size sheets of plywood or MDF isn't a good idea unless the sheet is supported by a table extension.
1Excludes Diesel. Additional fees and charges will apply for vehicles that require more than 5L of oil. Additional oil filter charges will apply. Eco fees, taxes and additional fees where applicable, are extra. Coupon valid for one-time use only. Coupon has no cash value and must be presented and surrendered at time of redemption. Not valid in conjunction with any other offer, coupon or discount. One coupon per vehicle. We reserve the right to limit the number of coupons redeemed per person. Limited time only. Altered or modified coupons will not be accepted. Coupon valid for intended recipient only. Some restrictions apply. See in store for details.Offer valid January 31- February 27, 2020.

miter saw vs table saw


"The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less-robust stand, and after viewing it in a big box store, I was glad to have this one."—Justin Park, Product Tester
For ideal usage, the on/off switch needs to be mounted on the front of the saw and should be easy to turn off with your knee or a swat without having to look at it to locate it. Most table saw models have a safety feature that is a plastic key that has to be inserted before the table saw can be turned on. Some may even have a way to padlock the switch.
You’ll be able to keep your space clear and work better with fewer distractions. The DEWALT DWE7490x 10 Inch Table Saw also comes with a push stick included in the kit so you’ll be able to take protective measures when you work. We’d recommend the DEWALT DWE749x to anyone as a good addition to their go to tools. It is an excellent tool and will help you do some of the best work of your life.
Modern-day manufacturers such as DeWalt and Bosch have started offering onboard storage on their job site table saws and it’s something I seriously cannot live without anymore. The DWE7491RS is no different, this job-site table saw comes with onboard storage for just about every component except for extra blades, which is kind of a bummer. Competitors such as the Bosch 4100-10 do come with the ability to store extra blade. 

best table saw 2015


A feather board is simply a piece of wood with slats cut into the end to resemble a feathered edge. A verticle feather board can be clamped at the correct height so that it presses down on the board that you’re cutting as it enters the blade. This is great for preventing kickbacks and for maintaining a constant depth whilst cutting dados and grooves. Remember that a feather board is not going to prevent a kickback due to bad working procedures or neglecting to use the safety equipment properly. It is merely an additional safety mechanism.
Inspect your wood carefully to make sure that you are able to maintain a safe working environment and are able to complete high quality work. Now that you’ve got these things in mind there are only a few more things you’ll need to remember before you’re ready to get to work! First, remember that the blade spins towards you, the operator. This means that you’ll always want to feed the wood to the machine by pushing it towards the blade and away from you.
The shark fin-style riving knife behind the blade keeps cut pieces from binding and causing kickback. The included push stick is useful when using thinner workpieces that don’t allow your hand to be at least 4 inches from the blade. The power button’s flip cover ensures that you only turn the blade on when you mean to, which is a welcome layer of safety. 

harbor freight


The scales that indicate the width of cut fall into one of two categories: continuous and separate. Of the seven we’re reviewing, DeWalt, Ridgid and Rockwell are continuous. You simply line up the fence with the desired measurement. The other four best table saw options—Bosch, Craftsman, Ryobi and Porter-Cable—require you to lock the fence in a specific position on fully extended rails, and read the dimension on a separate scale. We prefer the continuous scales and really like the tape measure–type scale on the Ridgid.

One important aspect to consider when buying a new table saw or looking for a new blade is axis adjustment. Being able to adjust the vertical height of the blade allows you to control the depth of the cut, it’s also useful when you don’t need to cut all the way through the wood, especially useful with thick pieces of wood. To help making bevel cuts and joints you can adjust the blade to certain angles that you require.

the best cabinet table saw


One important aspect to consider when buying a new table saw or looking for a new blade is axis adjustment. Being able to adjust the vertical height of the blade allows you to control the depth of the cut, it’s also useful when you don’t need to cut all the way through the wood, especially useful with thick pieces of wood. To help making bevel cuts and joints you can adjust the blade to certain angles that you require. 

porter cable table saw recall

×