Modern-day manufacturers such as DeWalt and Bosch have started offering onboard storage on their job site table saws and it’s something I seriously cannot live without anymore. The DWE7491RS is no different, this job-site table saw comes with onboard storage for just about every component except for extra blades, which is kind of a bummer. Competitors such as the Bosch 4100-10 do come with the ability to store extra blade. 
With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.
The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.
One important aspect to consider when buying a new table saw or looking for a new blade is axis adjustment. Being able to adjust the vertical height of the blade allows you to control the depth of the cut, it’s also useful when you don’t need to cut all the way through the wood, especially useful with thick pieces of wood. To help making bevel cuts and joints you can adjust the blade to certain angles that you require.

porter cable table saw recall


Financing available is “Equal payments, no interest” for 24 months (unless otherwise stated) and is only available on request, on approved credit and on purchases of $150 (unless otherwise stated) or more (Gift Cards excluded) made with your Triangle credit card at Canadian Tire, Sport Chek, Mark’s, L’Équipeur, Atmosphere, Sports Rousseau, Hockey Experts, L’Entrepôt du Hockey and participating Sports Experts. Interest does not accrue during the period of the plan. However, if we do not receive the full minimum due on a statement within 59 days of the date of that statement, or any event of default (other than a payment default) occurs under your Cardmember Agreement, all special payment plans on your account will terminate and (i) you will then be charged interest on the balances outstanding on such plans at the applicable regular annual rate from the day after the date of your next statement, and (ii) the balances outstanding will form part of the balance due on that statement. There is no administration fee charged for entering into a special payments plan. Each month during an equal payments plan you are required to pay in full by the due date that month’s equal payments plan instalment. Any unpaid portion not received by the due date will no longer form part of the equal payments plan and interest will accrue on that amount from the day after the date of your next statement at the applicable regular annual rate. Offer subject to change without notice.

dewalt table saw


If the piece of wood that you’re cutting does not have a straight edge to run along the fence guide, you won’t get an accurate cut. An uneven edge will move back and forth against the fence guide. A good way to create a straight edge to work with is to fasten the piece that you’re cutting to a piece of plywood that has a straight edge. Using screws or nails, you can attach the uneven wood to the straight piece, so that the straight edge runs along the guide rail. Make sure that the straight-edged wood is narrower than the width of your intended cut so that you only cut the piece that is intended to be cut.

best vintage table saw


Long pieces and whole boards can pose a problem because they will tend to drop off the end of the table. This will cause the feed end to lift. When this happens, you will be applying extra force to keep the wood held down. The way to avoid this from happening is to create a surface on the outfeed side of the saw that is at the same height as the saw’s table. Adjustable trestles are ideal for this purpose. You may have to use pieces of wood as spacers to get the exact height to ensure that the wood feeds through evenly.
If you’re going to be working with a table saw, you’re going to want to make sure you take a few safety precautions before beginning your work. Sharp, heavy duty tools like a table saw must be handled properly and treated with respect in order to see the best results and maintain a safe environment. Click here to find out the best way to sharpen your blades. Before you begin your safety preparations on the table saw itself, you need to take the time to make sure you are properly dressed for your task.

The three main factors to take into account when looking at table saws are known as “the three Ps”: Power, Price, and Portability.   Depending on what your particular needs are at a given time, you can shift the emphasis between these three factors. ​This will help you decide how you’ll use the power saw, and then let you focus on the most important table saw features needed.
A table saw is among the most dangerous power tools in your workshop. If not operated correctly, table saws can cause lots of harm. Different types come with varied safety measures and features like flesh sensors, auto-reset switches, anti-kickback pawls, among others. Finding one with all these features comes at a price, but what is cost compared to your safety?
With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous. 

craftsman


Without worrying much about the budget, the DEWALT DW745 is perhaps the best hybrid table saw you can get. It comes with a powerful motor, it is highly affordable, and it is a high-end tool that can double up as a job site table as well. At only 45 pounds, it is lightweight and can be moved from one location to another. This is why it is our top choice for homeowners.
Pre-calibrated right out of the box, Kreg’s miter gauge is a blessing for the impatient among us. The folks at Kreg know their customers don’t want to waste time preparing their tools — they want to use them! That’s why the KMS7102 boasts positive stops at a variety of the most common angles: so you can begin using your brand new miter gauge straight away.

Apart from the same standard kit that you get with the DeWalt DW745, you’ll also get a rolling stand and 2 blade wrenches. You have the option of also getting a 13/16” dado rail and saw blade combo pack for a few dollars more. For most people who want an affordable good quality table saw to use around the home for DIY and hobby projects, the DeWalt DW745 is an unbeatable option. However, the more serious hobby or professional carpenter will probably have to dig a bit deeper into their pockets and go for the DeWalt DWE7491RS.

Once you’ve made sure that the table saw is unplugged and there aren’t any extra materials in your workspace, you should turn your attention to the miter slot. See also related: Top 10 Miter Saws here. You’ll want to make sure that the miter (click here for sliding miter saws) slot is parallel to the blade. It is important that all measurements are precise and exact – nothing short of parallel will do. Once you’ve measured the blade and the miter slot, you’ll need to check the fencing as well.
The shark fin-style riving knife behind the blade keeps cut pieces from binding and causing kickback. The included push stick is useful when using thinner workpieces that don’t allow your hand to be at least 4 inches from the blade. The power button’s flip cover ensures that you only turn the blade on when you mean to, which is a welcome layer of safety. 

harbor freight


On-board storage is a nice touch: You can keep all your associated tools located right where you need them in the Tacklife. The blade guard and fence are standard-issue for this style of saw, and you’re unlikely to have any problems with them. Overall, it’s a great table saw for beginners – though the low power may leave you wanting to upgrade after a year or so.
Bosch GTS1031 10 in. Portable Jobsite Table Saw is powered by a 15 Amp motor that allows this table saw to rip through any lumber or hardwood quickly and easily. Bosch’s Smart Guard System provides added control while cutting, SquareLock Rip fence ensure consistent and accurate cuts, and an all-steel base provides added durability. Oh yeah, and we forgot to mention the price. This is the most affordable table saw on our list!

10 table saw


Now you’re ready to advance on to the next step. Take the spanners out and get ready to put them on the nut. You’ll want to make sure that they are the spanners that originally came with your table saw because they have been tested especially for your machine to make sure they won’t over tighten the nut or screws. Once you’ve made sure that you have the correct spanners, place them on the nut. Use the first spanner with your right hand and use it to stabilize your grip.
You’ll also want to be sure to check that the teeth of the blade are facing towards you since this is the direction that the wood is cut. Once you’ve made sure that the new blade is on properly you can put on the stabilizing parts and nut again. You’ll tighten the nut by putting the spanners on the same way you did before, however, this time you’ll push the spanner in your left hand away from you to tighten the nut instead of towards you.

sawstop table saw


The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.
Along with thinking about how the table saw will be used now, it is important to also consider how you will be using it in the future. Will your usage increase or decrease? Many woodworkers may turn a hobby into a fulltime profession if they are talented at what they do. Why are these considerations important? Because they will give you better insight into the kind of money you should spend on your table. If you are going to go into business for yourself in a year or two, spending the money for a high-quality table now is a good idea. It will save you from having to buy another table in the future to accommodate your new needs as a business rather than just a hobbyist.

dw745 table saw

×