Belt drive table saw motors run on a pulley system, most of the time some power is lost through this system, but belt drive blades can cut through thicker timber and hardwoods. They can produce power of around 3 to 5HP and thanks to the motor being mounted further away from the blade with belt drive, the motor will last longer as less dust will get into the motor. One thing to consider though is that belt drive will be in general more expensive and are normally found on heavy cabinet type saws, so this must be considered when working out your budget.

Long pieces and whole boards can pose a problem because they will tend to drop off the end of the table. This will cause the feed end to lift. When this happens, you will be applying extra force to keep the wood held down. The way to avoid this from happening is to create a surface on the outfeed side of the saw that is at the same height as the saw’s table. Adjustable trestles are ideal for this purpose. You may have to use pieces of wood as spacers to get the exact height to ensure that the wood feeds through evenly.

bosch reaxx table saw


One thing you must be aware of with a contractor saw is the fact that they can be a lot more difficult to move from job to job, this is something that must be considered before purchasing. For thicker and harder type woods a cabinet table saw maybe the best way to go, especially for the long-term benefits, but for the average mid-sized contractor it’s still a great option. Read More
1Excludes Diesel. Additional fees and charges will apply for vehicles that require more than 5L of oil. Additional oil filter charges will apply. Eco fees, taxes and additional fees where applicable, are extra. Coupon valid for one-time use only. Coupon has no cash value and must be presented and surrendered at time of redemption. Not valid in conjunction with any other offer, coupon or discount. One coupon per vehicle. We reserve the right to limit the number of coupons redeemed per person. Limited time only. Altered or modified coupons will not be accepted. Coupon valid for intended recipient only. Some restrictions apply. See in store for details.Offer valid January 31- February 27, 2020.

miter saw vs table saw


Table saw flesh sensors are a brilliant and clever piece of engineering. Sawstop revolutionised the industry when they came up with this technology. Human skin is a good conductor of electricity where is wood isn’t. So, the system works by passing an electric current through the table saw blade its self and when it’s cutting wood it’s fine as there is no conductivity between the wood and the blade but as soon as it hits human skin and becomes conductive it triggers an electric brake that stops in the blade in only 0.02 seconds. You may end up with a small cut but at least you won’t lose your finger or worse. There are quite a few different versions now on the market so we would advise you to read plenty of table saw reviews and do you research into the different systems to find the best one for you.


A splitter is a piece of metal that keeps the blade from binding in whatever material you are cutting if the saw kerf starts to close up. The splitter is vertical and sits directly behind the blade. This plays a big part in preventing kickback and should be mounted on the motor assembly so it rises and falls with the saw blades movements. You can also get splitters that can be adjusted to fit the width of the kerf. 

10 inch table saw blade


The SawStop PCS31230-TGP252 Professional Table Cabinet Saw is our premium choice pick for a reason - it’s one of the best cabinet saws on the market. You’ll be able to tackle nearly anything you can think of with this impressive tool and work like you’d never be able to imagine. The saw is powered by a 13 amp motor that has a 220-volt requirement and saws through material quickly and efficiently. It’s a carpenter’s dream and was built with all of the needs of the craftsman in mind.
One of our favorite features, however, would have to be the built-in safety system. The safety system quickly detects when human contact has been made with the blade by reading the electrical signals that are sent throughout the blade and locks down on the cabinet within milliseconds.The whole process only takes about 1/200th of a second and helps to save craftsmen from devastating injuries every day.

There are a lot of obvious reasons why the Skilsaw Portable Worm Drive Table Saw is top quality. Foremost, it is the first worm drive table, therefore, all other similar products are just based on this portable table saw. The Skilsaw is a brass-geared worm drive table saw that provides top power for maximum torque with its 5 HP dual-field motor for improved cutting speed. The selling point is its portability and compact design which makes it transportable anywhere.
Each of the following three styles of table saw is designed with a certain type of user in mind. Whether you’re a first-time woodworker, dedicated hobbyist, or professional construction worker, there’s a table saw out there for you. Before we get into the nitty-gritty of what makes a great table saw, we need to discuss the different types of table saws that you might consider purchasing.
How many teeth a saw blade has will determine how smooth the cut is. Most blades have from 24-80 teeth. The exceptions to these blades are specialty material specific blades (i.e. for masonry) In general, the more teeth a blade has the smoother the cut will be. The higher tooth count means that the cut speed will be slower as well. You cannot overcome a slower cutting speed by pushing harder on the material. This is a common mistake newbies make. All this will do is cause kickbacks when the saw blade catches and tosses the object back towards to the user at dangerously high speeds.
Meanwhile, the most updated Ridgid table saw boasts of a heavy duty portable body with stand. This has a 15-amp motor with 4000 rpm. This is an updated table saw that provides a single-point release for simple assembly and disassembly. This Ridgid table saw offers an onboard storage system for your miter gauge, blades, rip fence and other important accessories. This is a handy, compact and portable power table saw you just might need in your workshop or worksite. 

table saw stand


If you work with wood in any capacity, chances are you rely on a table saw to make clean, accurate cuts. But when your good old saw goes to the big toolshed in the sky, it’s time to opt for a replacement. Before you dish out your hard-earned money on the first model you come across, remember that a table saw is a big investment, so it’s in your best interest to look into the many technical specifications of each option before you settle on a final purchase.

Along with thinking about how the table saw will be used now, it is important to also consider how you will be using it in the future. Will your usage increase or decrease? Many woodworkers may turn a hobby into a fulltime profession if they are talented at what they do. Why are these considerations important? Because they will give you better insight into the kind of money you should spend on your table. If you are going to go into business for yourself in a year or two, spending the money for a high-quality table now is a good idea. It will save you from having to buy another table in the future to accommodate your new needs as a business rather than just a hobbyist.

metabo table saw

×