All these saws have fences that extend to at least 24 in. to allow you to rip a 4 x 8-ft. sheet of plywood in half. And they all have a slightly different way of accomplishing this. DeWalt has the most straightforward method. You just push the fence out on its rails and flip over the board support. On the Rockwell saw, you flip out a hinged fence rail. The only drawback to this fence is that it must remain in the extended position for any cut, so it takes up quite a bit of room. The remaining saws require you to release one or two levers and pull out the fence extension.
The Dewalt DW745 is a well-engineered portable jobsite table saw that will cater to a wide range of projects. Whether you’re a professional or an amateur this fantastic 10″ compact saw has been thoughtfully designed for the end user. This shouldn’t come as a surprise if you’ve used Dewalt tools in the past because designing heavy-duty power tools is what Dewalt is known for and thankfully, the Dewalt DW745 is no different.
We spent over 30 hours researching and testing 10 different brands of table saws and found that maximum speed, cord length, and cut depth were most important. The DEWALT DW7480 table saw scored high marks in every category and is our top pick. This 48 pound table saw is perfect for using at home or taking with you to the job site. It has a powerful 15 amp motor and 24” rip capacity that makes it a favorite with everyone. The 2 ½” dust collection port allowed us to connect the saw to a shop vac and reduce the amount of dust that was in the garage.
There are a lot of obvious reasons why the Skilsaw Portable Worm Drive Table Saw is top quality. Foremost, it is the first worm drive table, therefore, all other similar products are just based on this portable table saw. The Skilsaw is a brass-geared worm drive table saw that provides top power for maximum torque with its 5 HP dual-field motor for improved cutting speed. The selling point is its portability and compact design which makes it transportable anywhere.
For any kind of professional woodworking and large scale construction work, the cabinet table saw is the one for the job. These types of table saws are often called stationary saws. The motor is protected in a cast iron and steel cabinet that reduces noise and vibration as well. With reduced vibration comes better accuracy which is always the desired effect, especially for professionals. The motor us a powerful 3-5 hp and requires a 220-volt outlet. If you are using it in a home workshop, a special outlet may need to be installed if 220s are not already installed in your garage or shop. Measuring about 28” x 43” and weighing in at over 400 pounds, these table saws were not designed to be portable. The large work surface is ideal for cutting large pieces with ease. Cabinet saws can use a 12” blade with no problem, although a 10” blade is the most commonly used. It is the most expensive of all of the styles of table saws.

best table saw blade for hardwood


Apart from the same standard kit that you get with the DeWalt DW745, you’ll also get a rolling stand and 2 blade wrenches. You have the option of also getting a 13/16” dado rail and saw blade combo pack for a few dollars more. For most people who want an affordable good quality table saw to use around the home for DIY and hobby projects, the DeWalt DW745 is an unbeatable option. However, the more serious hobby or professional carpenter will probably have to dig a bit deeper into their pockets and go for the DeWalt DWE7491RS.

the best small table saw


This saw/stand combination is the most expensive of the group. But you get some top-end features. The first thing you’ll notice is the stand with its splayed legs that have no wheels in the setup position. You can’t wheel it around, but man is it sturdy, which is great if you’re ripping sheets of plywood or long, heavy boards. Another unique advantage of this stand is that you can easily remove the saw. That makes the saw easy to transport and to use without the stand. But our favorite feature is the patented rack-and-pinion fence that stays perfectly parallel to the blade and is super easy to adjust. If you can afford to spend a little more, we think the DeWalt is hard to beat.

best table saw jig


The model BS5205 4.5 inch band saw is ETL Certified and offers 3 speeds. Engineered for cutting ferrous and nonferrous metals with speed, efficiency and durability. A Solid cast iron saw head frame and vise that opens to 6 inch. Featuring a heavy-duty steel stand with tool shelf plus wheels and handle for easy transport. The BS5205 has a vise that swivels up to 45 degrees, as well as a throat depth of five inches, enabling you to gain more flexibility and control over each project. The Miter gauge allows 90 degrees to 45 degrees cuts. You can set the speed at 80, 120, and 180 feet per minute--whichever best suits your materials and job. It's 1/2 HP motor can easily cut through aluminum to steel.

Metabo HPT Table Saw C3610DRJQ4M offers users the power of a corded saw and the freedom or a cordless platform. The corded-cordless Table Saw produces the power and portability that’s needed on a jobsite. The Multivolt Saw accepts a 36V battery or plugs into an outlet with the AC Adapter. With additional features like soft start, large table saw size, and a rip capacity of 35″, it comes as no surprise that the award-winning saw is on our list.
The model BS5205 4.5 inch band saw is ETL Certified and offers 3 speeds. Engineered for cutting ferrous and nonferrous metals with speed, efficiency and durability. A Solid cast iron saw head frame and vise that opens to 6 inch. Featuring a heavy-duty steel stand with tool shelf plus wheels and handle for easy transport. The BS5205 has a vise that swivels up to 45 degrees, as well as a throat depth of five inches, enabling you to gain more flexibility and control over each project. The Miter gauge allows 90 degrees to 45 degrees cuts. You can set the speed at 80, 120, and 180 feet per minute--whichever best suits your materials and job. It's 1/2 HP motor can easily cut through aluminum to steel.
The Bosch 4100-09 has some outstanding features, some of which are an improvement on the DeWalt. The only areas where it falls short of the DeWalt DWE7491RS is that it doesn’t have as high RPM and the rip capabilities aren’t as good either. The Bosch warranty of one year doesn’t quite match up to the DeWalt 3-year warranty. When all is said and done, it will really be a matter of personal choice, which one you prefer.
This Ridgid table saw is a heavy-duty table saw that comes with its own stand with wheels. It has a strong 115-amp motor at 4000 rpm. It is an updated table saw with onboard storage for your tools like miter gauge, extra blades, rip fence and other saw accessories. This is a durable table saw for different projects and can even take 4 x 4 inches in just one pass. This has a front and back clamping fence to keep your material safe and sturdy as you work.
The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.

kobalt 10 table saw

×