This table saw was completely redesigned and heavily improved in both safety measures and cutting capacity. For safety, DeWalt redesigned the red power switch to be electronic. It automatically resets the saw to turn off if the power is interrupted whatever the cause. I’ve heard some job-site horror stories regarding table saws who weren’t turned off properly so this redesign was very much needed.

best table saw under 500


Table saws will use one of two different kinds of drive configurations; Direct-drive motors and Belt-drive motors. In a direct-drive motor, they will link directly to the blade itself and transfer all of the power of the motor to the blade. They tend to last longer than belt drive motors and there is no belt to replace or worry about getting worn out. Belt drive motors transfer power from the motor to the blade through a belt. In this type of configuration, the motor can be offset away from the sawdust which helps the motor last longer. In general, belt drive motors need more preventative maintenance than direct-drive motors do. If you have a belt drive motor, check the tension of your belts as well as checking them for wear periodically to ensure your continued safety.
Measuring approximately 22” x 38”, the contractor table saw is then next size up from the bench style. It typically sits on an open attached stand or base which may or may not be on wheels. It weighs between 200-300 pounds and is still portable but requires more than one person to lift. This style of table saw is good for woodworking shops, hobbyists, small contractors and DIYers. The 1-2 hp motors have enough power and stability to handle more heavy duty job site work and workshop demands. One of the benefits to these saws is that they still run on standard electrical circuits.
Make all the cuts needed for framing or other construction projects with Rona’s selection of table saws. There are reliable, well-known brands to choose from such as Bosch and DeWalt, offering the capabilities and reliability demanded by do-it-yourselfers, and professionals alike. Many make not only straight cuts but also angled cuts like those made by mitre saws. Compact table saws fit on a workbench, have folding stands for convenient storage, or have wheels for portability around job sites. Maintain and improve performance with table saw accessories such as additional supports or dado inserts.
Blade guards are an important safety device and should never be removed from the saw. You want to find one that rises up parallel to the table so it is always on top of the material you are working with. The purpose of this blade guard is to protect you from the spinning blade. While some woodworkers find them annoying, the safety they provide is well worth the inconvenience.
There are three areas of importance that you’ll need to protect – your ears, eyes, and arms. To start with, you’ll want to make sure that you have a pair of earplugs or noise reducing headphones that will help to minimize the negative effects of being exposed to loud noise for prolonged periods of time. While this may seem like a small solution, it is something that you’ll want to make sure you take into full consideration – to avoid doing so could be extremely detrimental to your overall health.
The Bosch GTS1031 Portable Table Saw is an excellent tool for any craftsman - definitely one of the best tools you could add to your work arsenal. We love that it is easily transported from place to place thanks to its lightweight design and ergonomic carry handle. The design transfers all of the weight of the machine to a specified center of gravity and helps to make it easier to carry the 50 pound machine. The Bosch GTS1031 Portable Table Saw also comes with a smart guard system that helps the device perform at peak levels while keep you safe during your work.
We spent over 30 hours researching and testing 10 different brands of table saws and found that maximum speed, cord length, and cut depth were most important. The DEWALT DW7480 table saw scored high marks in every category and is our top pick. This 48 pound table saw is perfect for using at home or taking with you to the job site. It has a powerful 15 amp motor and 24” rip capacity that makes it a favorite with everyone. The 2 ½” dust collection port allowed us to connect the saw to a shop vac and reduce the amount of dust that was in the garage.
Kickback is probably more dangerous than cutting yourself with the blade because it can happen so easily and without notice. Kickback happens when the wood becomes jammed and is forced back toward you. This is not a nice experience and often results in pretty serious injuries. Table saws are fitted with a riving knife and often an anti-kickback pawl, make sure these are fitted correctly.
Dewalt designed an excellent table saw when they created the DW745 and we consider it to be the best buy on the market from our review. The design is fairly lightweight and easy to transport as it only weighs about 45 pounds. Additionally, the device is full of great features that enable it to work with speed and efficiency that you typically don’t see in a portable saw.

Skillsaw SPT99-12 is a sturdy table saw that features a worm drive with a 3-5/8” depth of cut and 30-1/2” rip capacity. Easily transport this around any terrain with its rugged rolling stand with 16” wheels. Take it up or down stairs with ease and manage going over grass, dirt, and thick roots. Work with increased productivity with a maximum RPM of 5,000 and motor that produces 4.4 hp. Then with the precision rack and pinion fence system make adjustments to your fence to get accurate cuts, smoothly and quickly. Get all your cuts done by yourself, no matter what the size, thanks to the left support allowing for larger pieces.
The battery operated Milwaukee 2736-21HD Saw relies on a single M18 REDLITHIUM HIGH OUTPUT HD 12.0 battery that generates energy equivalent to a 15 Ah corded saw and produces 6,300 RPM. For the professional carpenter, remodeler, and general contractor, this table saw optimizes for power, productivity, and portability. Included in this machine is the REDLINK Plus intelligence to maximize the performance of your tool and will also protect from overload, overheating, and over discharge. This table saw also features onboard storage for the included accessories, so you don’t have to worry about misplacing them. Keep track of where your saw is on the site with ONE-KEY app and manage the output of how much energy the saw uses from your phone. 

home depot table saw


I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt. 

best table saw for dado cuts


A table saw is among the most dangerous power tools in your workshop. If not operated correctly, table saws can cause lots of harm. Different types come with varied safety measures and features like flesh sensors, auto-reset switches, anti-kickback pawls, among others. Finding one with all these features comes at a price, but what is cost compared to your safety?
Contractor saws weigh quite a bit more than portable saws, averaging between 150 and 350 pounds, but are still somewhat portable. They have a heavier, cast iron table top, and a motor that is usually more powerful than a jobsite saw. Even so, they’re within prices affordable for more committed hobbyists. Contractor saws can range between $800 and $2,000. They’re good for basic cutting tasks, as well as making home furniture and cabinetry work.

best table saw crosscut sled


The DeWalt is a 7 ¼” worm drive circular saw that is lightweight at only 14 pounds. It is light so it’s good for daily use outdoors or in the field. It is made from magnesium that gives you a strong but light saw. This has an extra-wide saw hook that accepts material up to 2- ½ inches wide. This DeWalt circular saw has a tough cord protection system to give you 4 times improved cord jerk protection. Along with its 53-degree bevel capacity which detents at 22.5 degrees and 45 degrees, this is going to be a versatile powerful saw for different applications. it can be used to cut through wood, wood panels, metal, acrylic, plastic, and tile.
The DEWALT DW745 is a smaller version of the DEWALT DWE7491RS. It’s still a good saw in its own right. It comes with a 15-amp motor, just like the larger unit, though it can only handle rips of up to 20 inches. You’ll experience the same power and consequently, the same speed as the larger model, though you can’t cut pieces as large. This model is also meant to be moved, and while it doesn’t have wheels, it has a metal roll cage that will help it survive travel without taking any damage.

best table saw blade for melamine


There are some procedures, like cutting dados where you will be required to remove the safety guard. What happens too often, is that people neglect to put the safety guard back again. The time it takes to remove and replace the safety guard can become a bother, but living for the rest of your life, missing a finger or two is much worse. Back to that phrase that I mentioned earlier: don’t become complacent and always follow the rules.

table saw sale


The CM8S 8-1/2 inch single bevel sliding compound miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighs only 37 pounds. These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read miter and bevel scales, and detent system provides quick and accurate cuts. The CM8S also has the same crosscut capacity (12-1/4 inch) as a 10 inch miter saw, at 30% lighter weight.
The more table size you have, the more support you have which is always a plus, not only for convenience but safety too. There are right side extensions that can be purchased for table saws that increase the table saw’s capacity to get to the center of a 4 x 8 sheet of wood. Although most saws have a rear band that supports the wood as it exits the saw, an additional safety measure is to rig up an outfeed support of some kind in addition to this rear bar. Be sure that the outfeed support you set up is ¼” lower than the table saw is.

As you would expect, the most expensive saws made slightly smoother cuts. But the difference was negligible. The only saw that struggled to make smooth cuts in the super-thick oak was the Ryobi. In more common situations, like cutting 3/4-in.-thick material, Ryobi’s cut quality was fine. We found the blades included with all the saws to be adequate for most ripping tasks. But if you want cuts smooth enough for glue joints, you’ll have to invest in a better blade.

For homeowners without the luxury of a huge garage to fit their enormous table saw, DEWALT’s DWE7480 is a compact alternative to bulkier machines with the same wood slicing power. Measuring 25.8 x 26.5 x 13.9 inches, the DWE7480 hosts a 15-amp motor that cuts at an unbelievable 4800 rpm with a ten-inch blade, meaning this small package packs big performance—and with adjustable rear feet that are designed to allow users to level their table saw on uneven surfaces, you’ll be sure to get a clean, precise cut every time, no matter how rugged the terrain. An additional dust port makes collecting your sawdust a breeze—especially if you attach an optional shop vac extension.

the best portable table saw


Over the years I’ve bought quite a number of Bosch power tools, including an 8¼” hand-held circular saw. This is despite my loyalty to more established brands like DeWalt and Festool. I must say, though, the Bosch does lack some of the precision and smooth easy usability of the more established brands. I mean no disrespect to Bosch here, my trusty Bosch circular saw has served me faithfully for more than 15 years and is still going strong. The main thing that makes Bosh tools so irresistible is their price. They are often a good deal cheaper than other major brands, offering the same basic features and seem to be quite indestructible. Though they may lack some of the finesse of the more expensive tools.

The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.

review of best table saws


The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.

kobalt 10 table saw

×