The Bosch 4100-09 10 Inch Table Saw is an expert tool that will be sure to impress its users with the reliable design and easy to use set up system. Our favorite feature was the gravity rise design that allows you to push the device around easily and focus more on getting the job done instead of wasting time trying to set up a complicated device. The tool is also coated in a powder coat that helps to improve the longevity of the device and features a collapsible design that is easy to fold up and down once you get to the job site.

best table saw for home diy


When you purchase your table saw, more than likely it will have standard 10” carbide tipped blade that is good for general purpose use. This blade is capable of cross cutting a 4 x 4. If you replace it with a 40 tooth combination blade you will improve the quality of your cuts significantly and more than likely be much happier with the blade overall. You can get specialty blades also if you are going to be cutting other materials as well.

With a 32½-inch rip capacity and motor capable of up to 4800 rpm, the DWE7491RS is more than prepared to effectively deliver 3⅛-inch deep cuts to thick slabs of wood. Happy customers sing this machine’s praises, reporting that it’s as sturdy as a table saw can get — plus, it’s easy to use, and assembling it is a cinch. They do however note that workers looking to produce finer cuts should seek out a replacement blade since the one provided is more suited for fast, rough work.
Ironically, it’s the more experienced carpenters that are more likely to get injured whilst using a table saw. Research has shown that most injuries are reported by carpenters with more than 18 years of experience. The reason for this is complacency, people tend to become more relaxed over the years. So it’s important to maintain a healthy respect for the machine that you’re working with and never forget the possible danger that you face, no matter how proficient you become.

hercules table saw


For those looking for something small, these benchtop table saws are just right. Used by contractors who need portable table saws, they’re suitable for quick placement in vehicles and setting up at project sites. Typically, the unit weighs less than 65 pounds and comes equipped with a universal motor. Depending on the model, some come with handy fences. A fence is the part of a saw mounted parallel to the blade, ensuring safe and fast multiple rip cuts.

portable table saw


Along with thinking about how the table saw will be used now, it is important to also consider how you will be using it in the future. Will your usage increase or decrease? Many woodworkers may turn a hobby into a fulltime profession if they are talented at what they do. Why are these considerations important? Because they will give you better insight into the kind of money you should spend on your table. If you are going to go into business for yourself in a year or two, spending the money for a high-quality table now is a good idea. It will save you from having to buy another table in the future to accommodate your new needs as a business rather than just a hobbyist.
Although both DEWALT DW745 and DWE7480 have similar features like 120 voltage power supply, 10 inches blade diameter, 5/8 inches arbor size, 2.5 inches dust collection port and similar maximum cut depth, there are few differences between them. Modular guarding systems are available in both these models which can give you efficiency while setting up the tools.

ridgid table saw


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

craftsman


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

The battery operated Milwaukee 2736-21HD Saw relies on a single M18 REDLITHIUM HIGH OUTPUT HD 12.0 battery that generates energy equivalent to a 15 Ah corded saw and produces 6,300 RPM. For the professional carpenter, remodeler, and general contractor, this table saw optimizes for power, productivity, and portability. Included in this machine is the REDLINK Plus intelligence to maximize the performance of your tool and will also protect from overload, overheating, and over discharge. This table saw also features onboard storage for the included accessories, so you don’t have to worry about misplacing them. Keep track of where your saw is on the site with ONE-KEY app and manage the output of how much energy the saw uses from your phone.

best table saw under 1500


The Craftsman Evolv 10 Inch Table Saw is an excellent tool for any craftsman and will change the way you are able to do work The device is fairly easy to transport as it weighs only 50 pounds and can easily be set up on its stand when you reach your designated work area. The saw also comes with a great starter tool kit which includes a miter gauge, a push stick, a stand, a riving knife, and a blade guard fence.

The DeWalt DW745 is not their top-of-range job site table saw, but it’s a great competitor among 10” portable table saws. The incredibly reasonable price makes it an attractive option for both woodworking hobbyists and professional carpenters alike. If you find a 10” job site saw any cheaper, take a serious look at whether you’re getting the same quality.

the best table saw to use


If you’re looking for a machine with high capacity, the SKIL 3410-02 has a 3.5-inch cut height with the ability to cut through four times the material on each pass. The consensus among reviewers is that, for such a low price, you end up compromising on miter gauge and saw blade quality. Luckily both of those things can be replaced if you so choose.  

This particular table saw features a high-torque motor of 15-amp, which is suitable for cutting hardwoods as well as the pressure treated timber. This is also aided by a speed of 4800RPM. The tool also features a rack, as well as a pinion telescoping fence rail that creates accurate, meticulous, and smooth fence adjustments. You can flip over the fence to make small and precision rip cuts.

Make all the cuts needed for framing or other construction projects with Rona’s selection of table saws. There are reliable, well-known brands to choose from such as Bosch and DeWalt, offering the capabilities and reliability demanded by do-it-yourselfers, and professionals alike. Many make not only straight cuts but also angled cuts like those made by mitre saws. Compact table saws fit on a workbench, have folding stands for convenient storage, or have wheels for portability around job sites. Maintain and improve performance with table saw accessories such as additional supports or dado inserts.
The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.

kobalt 10 table saw

×