The model BS5205 4.5 inch band saw is ETL Certified and offers 3 speeds. Engineered for cutting ferrous and nonferrous metals with speed, efficiency and durability. A Solid cast iron saw head frame and vise that opens to 6 inch. Featuring a heavy-duty steel stand with tool shelf plus wheels and handle for easy transport. The BS5205 has a vise that swivels up to 45 degrees, as well as a throat depth of five inches, enabling you to gain more flexibility and control over each project. The Miter gauge allows 90 degrees to 45 degrees cuts. You can set the speed at 80, 120, and 180 feet per minute--whichever best suits your materials and job. It's 1/2 HP motor can easily cut through aluminum to steel.
The simplest way to find out what size your table saw needs or indeed if you’re buying a special size is to consult the table saw user Manuel. I would make sure you do this as often there are many things in modern tables saws that could affect the blade size and type. This is because modern saws have many different amazing and varied features, things size blade guards, special safety mechanisms and arbor sizes etc. With the We recommend you spend some time reading your manual in detail to avoid possible issues

About the setbacks, only a few users have cited that the dado blade is hardly accommodated perfectly and that it features a flat-track gauge instead of a T-track, which might not keep the miter gauge appropriately in place. Other than that, this table saw is popular and it enjoys good reviews. So, if you value efficiency and meticulous works, this is the saw you should get.

delta table saw


The DeWalt, Bosch and Ridgid saws have strong stands that are easier to set up, sturdy fences that lock down parallel to the blade every time, and smooth-operating blade controls. If you’re a contractor or an avid DIYer who just likes top-quality tools that feel good and last a long time, we think the extra few hundred dollars is a good investment.

How big a table saw is, is determined by the largest blade the saw will hold. 8” blades are the smallest that should be used for any home workshop. You can get blades in 9”, 10”, and 12” sizes as well. Most workshops will not really need the 12” blade as this has a very deep cut capability, but for construction firms and larger, commercial shops, the 12” comes in handy.
A lot of the modern table saws nowadays will have a dust collection port where you can hook up a vacuum or extraction system to it. We would always recommend that you purchase a table saw with a dust port, always check the size of the port to make sure it fits with either your vacuum or your extraction system, or you can always modify something to make them fit.
For ideal usage, the on/off switch needs to be mounted on the front of the saw and should be easy to turn off with your knee or a swat without having to look at it to locate it. Most table saw models have a safety feature that is a plastic key that has to be inserted before the table saw can be turned on. Some may even have a way to padlock the switch.
This “review” is a giant nothingBurger. There is not one scrap of objective comparison between these saws. Because you sell them, they’re all great and will all zip right through “the hardest woods”. Bulll$hit. You did not test, compare, analyze, or use ANY of these saws. Re-hashinf manufacturer specs is a “Roundup” but it certainly is not a review. Typical sales pablum.

best portable table saw under 300


Contractor saws are a perfect balance between functionality, manoeuvrability and price. These sorts of saws are perfect if you have bigger projects that you’re working on and will stay on site for a few months. This is due to the fact that they are a lot less portable, but that being said they are a great in-between saw as they still have great rip capacity and overall cutting power.


A splitter is a piece of metal that keeps the blade from binding in whatever material you are cutting if the saw kerf starts to close up. The splitter is vertical and sits directly behind the blade. This plays a big part in preventing kickback and should be mounted on the motor assembly so it rises and falls with the saw blades movements. You can also get splitters that can be adjusted to fit the width of the kerf.

10 inch table saw blade


The maximum rip to the right of the blade is 20” and 12” to the left, which is also very reasonable for a machine in this price range. You don’t get a stand and this obviously means no wheels either, so you’ll have to carry it around. Though it’s really not a heavy tool to move, weighing only 45lbs and this is despite the fact that is an incredibly durable piece of machinery with a metal roll cage. Adding to its compact portability, it has telescopic fence rails.

You will need specialty blades for cutting materials such as plywood, masonry, hardwood and metals. Other specialty blades are used for dado cuts. Most dado sets have multiple rows of teeth and chippers and they are typically much wider than traditional blades. Be sure that the model of table saw you have can accommodate the type of specialty blades you want to get so you don’t waste your money on a blade that won’t fit.


Although both DEWALT DW745 and DWE7480 have similar features like 120 voltage power supply, 10 inches blade diameter, 5/8 inches arbor size, 2.5 inches dust collection port and similar maximum cut depth, there are few differences between them. Modular guarding systems are available in both these models which can give you efficiency while setting up the tools.
Kickback is probably more dangerous than cutting yourself with the blade because it can happen so easily and without notice. Kickback happens when the wood becomes jammed and is forced back toward you. This is not a nice experience and often results in pretty serious injuries. Table saws are fitted with a riving knife and often an anti-kickback pawl, make sure these are fitted correctly.

best table saw to buy


One of the first and most important things to consider is what type of table saw you require. When considering the type make sure you consider things like, where will be using the saw, will it need to be portable and move from job to job or can it be stationary like in a work shop. Also, what will be the largest size bits of timber I will be cutting, what sort of power will I require and budget, below we’ve listed the main types so we hope it helps you find the right type for you.
A simple push stick comes standard with most saws. If you don’t have a push stick, it’s easy to improvise one by cutting a strip of plywood with a notch cut into one end that will enable you to press the wood down as you feed it through with the stick. While push sticks are very common, they are not the best tool for the job. This is because they don’t give you much directional control. You can ask any experienced carpenter and they’ll tell you that a push handle is far superior. A push handle allows you to press down on the wood that you’re cutting with the force of your hand, giving you much better control.

table saw fence


The old designs of table saws did not have the angled capability that newer models have now with their ability to have the blades angled at 45 and 90 degrees. Before these upgraded styles, the table itself had to be tilted which made cutting extremely unsafe. The new styles that accommodate angling the blade for the beveled cuts make things much easier and safer for the user.
The worm drive gearing in the SKILSAW SPT70WT-01 creates maximum torque and power for cutting through any medium. You can feel the torque, as this saw doesn’t ever bog down, even when pushing your material through quickly. The max RPM of 5300 isn’t the best on the market though. The arms do extend to allow for a 25-inch rip with the fence, which is nice.
Kickback is probably more dangerous than cutting yourself with the blade because it can happen so easily and without notice. Kickback happens when the wood becomes jammed and is forced back toward you. This is not a nice experience and often results in pretty serious injuries. Table saws are fitted with a riving knife and often an anti-kickback pawl, make sure these are fitted correctly.

best table saw review 2017


A splitter is a piece of metal that keeps the blade from binding in whatever material you are cutting if the saw kerf starts to close up. The splitter is vertical and sits directly behind the blade. This plays a big part in preventing kickback and should be mounted on the motor assembly so it rises and falls with the saw blades movements. You can also get splitters that can be adjusted to fit the width of the kerf.

10 inch table saw blade

×