This saw/stand combination is the most expensive of the group. But you get some top-end features. The first thing you’ll notice is the stand with its splayed legs that have no wheels in the setup position. You can’t wheel it around, but man is it sturdy, which is great if you’re ripping sheets of plywood or long, heavy boards. Another unique advantage of this stand is that you can easily remove the saw. That makes the saw easy to transport and to use without the stand. But our favorite feature is the patented rack-and-pinion fence that stays perfectly parallel to the blade and is super easy to adjust. If you can afford to spend a little more, we think the DeWalt is hard to beat.

table saw harbor freight


Hello, Thank you for your comment. We have been a full line Jet Distributor for over 25 years. We do sell the Jet table saws but for some reason or another they did not make the list. Jet’s Table saws are high quality and offer a great value but it seems that in all cases we looked at there was a different unit that performed slightly better. This does not mean that the Jet table saws are bad, it just means that in our categories they didn’t come out in the #1 position.

best table saw under 300


Mitre Saws (21) Table Saws (14) Band Saws (1) Bench Grinders and Chop Saws (3) Planers, Jointers (6) Cement Mixers (3) Drill Press (1) Accessoires-Planers and jointers (1) Accessories - Band saws (20) Accessories - Sanders (1) Accessories - Scroll saws (6) Accessories-Mitre saws (10) Accessories-Table saws (18) Bench Grinders and Chopsaw Wheels (93) Electric Motors and Parts (17) Portable Industrial Air Movers (29) Table Saw Blades (1) Mitre Saw Blades (8) Tile and Paver Saw Blades (16) Sander (1) Universal Accessories (3)

With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.
Contractor saws weigh quite a bit more than portable saws, averaging between 150 and 350 pounds, but are still somewhat portable. They have a heavier, cast iron table top, and a motor that is usually more powerful than a jobsite saw. Even so, they’re within prices affordable for more committed hobbyists. Contractor saws can range between $800 and $2,000. They’re good for basic cutting tasks, as well as making home furniture and cabinetry work.

best table saw crosscut sled


As with many table saws, the included plastic miter gauge isn’t nearly as precise as the fence and so I made angled cuts on a miter saw. If you are hoping to use this saw in lieu of a miter saw, you’ll probably want to invest in a higher-quality third party miter gauge. You can also attach a vacuum to this saw’s dust collection port for easy cleaning.

About the setbacks, only a few users have cited that the dado blade is hardly accommodated perfectly and that it features a flat-track gauge instead of a T-track, which might not keep the miter gauge appropriately in place. Other than that, this table saw is popular and it enjoys good reviews. So, if you value efficiency and meticulous works, this is the saw you should get.


Offer valid from Thursday, June 25 to Wednesday, July 15, 2020 online at rona.ca (for participating stores) and in participating stores. Buy 2 large select kitchen appliances, on the same bill, and save $100. Buy 3 large select kitchen appliances, on the same bill, and save $300. Applicable only on Maytag, Whirlpool and KitchenAid. Applicable only on refrigerators, dishwashers, electric ranges, slide-in electric ranges, built-in cooktops, over-the-range microwave hoods . Small appliances, laundry and online exclusive products are not eligible. RONA reserves the right to limit quantities of products purchased. While stocks last. Only purchases of products at regular price paid by cash, debit or credit card or by PalPal are eligible. Special orders, discontinued products, purchases made with in-store accounts and by clients with specific contractual agreements with a participating store or as an entrepreneur or a builder are not eligible for the discount. Does not apply to previous purchases and layaways. Not convertible into cash. Cannot be combined with any other offer. Certain conditions apply. Details in participating stores. IMPORTANT NOTE In the context of the COVID-19 and to ensure the safety of our employees and clients, the delivery conditions can vary. Amongst other things, the deliverer may need to leave the items outside. See here details in this regard: https://www.rona.ca/documents/Covid%2019_Change_in_delivery_process_faq.pdf. Delivery delays may vary by region, by store or by appliance model. Certain conditions and restrictions apply. See your participating store for more details and to ensure this promotion is available in your area. This promotion may be terminated at any time without notice. Details in participating stores.

miter saw table


There are some procedures, like cutting dados where you will be required to remove the safety guard. What happens too often, is that people neglect to put the safety guard back again. The time it takes to remove and replace the safety guard can become a bother, but living for the rest of your life, missing a finger or two is much worse. Back to that phrase that I mentioned earlier: don’t become complacent and always follow the rules.
This limited-time offer applies only to the purchase of $500 or more of Whirlpool, Maytag, KitchenAid, Amana, Samsung, LG, Frigidaire, Frigidaire Gallery, Frigidaire Pro, Electrolux, Ge, Ge Profile, Ge Café, Haier, Haier America and Bosch appliances. Products that are not appliances are not part of this offer, so delivery must be paid. This limited-time offer applies only to the purchase of $500 or more. It includes the delivery of appliances in a 35-km radius of the participating store and the basic installation, which includes levelling and plugging in washing machines, dryers, refrigerators and ranges, if applicable; as well as the pickup of used appliances on the basis of “1 used appliance pickup for 1 new appliance purchased”. The service includes no carpentry or plumbing work, no wall hanging nor plugging in gas appliances. The used appliance pickup is only applicable to appliances owned by the client. The client must provide a safe way for delivery personnel. Delivered appliance waste materials will be handled by our delivery team. Delivery delays may vary by region, by store or by appliance model. Certain conditions and restrictions apply. See your participating store for more details and to ensure this promotion is available in your area. This promotion may be terminated at any time without notice. Details in participating stores. IMPORTANT NOTE: In the context of the COVID-19 and to ensure the safety of our employees and clients, the delivery conditions can vary. Amongst other things, the deliverer may need to leave the items outside. See here details in this regard: https://www.rona.ca/documents/Covid%2019_Change_in_delivery_process_faq.pdf. Delivery delays may vary by region, by store or by appliance model. Certain conditions and restrictions apply. See your participating store for more details and to ensure this promotion is available in your area. This promotion may be terminated at any time without notice. Details in participating stores.

the best contractor table saw


The DeWalt DW745 is not their top-of-range job site table saw, but it’s a great competitor among 10” portable table saws. The incredibly reasonable price makes it an attractive option for both woodworking hobbyists and professional carpenters alike. If you find a 10” job site saw any cheaper, take a serious look at whether you’re getting the same quality.

the best table saw to use


The blade material is another important factor to consider when shopping for the best saw blade for your table saw. When it comes to choosing the right material, there are two aspects to consider. You should know about the material of the plate as well as the material used to make the teeth of the blade. All saw blades are not created equal. There are cheap saw blades that won’t deliver the results you expect from your woodworking projects. Don’t scrimp on the blade when you have invested a significant amount of money on a quality table saw. Some of the highest quality saw blades are made from laser-cut steel and the teeth are made of C4 grade carbide using microscopic grains.
And finally, they all include a blade guard that can be removed and reinstalled without tools. Because a few sawing operations, such as non-through cuts, require you to remove the blade guard, we like saws that make this task easy. The Bosch, DeWalt and Ridgid saws have well-designed blade guards that are easy to remove and reinstall. The blade guards on all but the Porter-Cable and Craftsman also have a feature that holds the blade guard in the raised position to allow better blade visibility for setting up cuts.
Now you’re ready to advance on to the next step. Take the spanners out and get ready to put them on the nut. You’ll want to make sure that they are the spanners that originally came with your table saw because they have been tested especially for your machine to make sure they won’t over tighten the nut or screws. Once you’ve made sure that you have the correct spanners, place them on the nut. Use the first spanner with your right hand and use it to stabilize your grip.
Likes: Cuts extremely well and has excellent stability. Its blade guard and riving-knife assembly are locked and unlocked by a lever located conveniently along the table's left edge. A simple, separate shark-fin riving knife can be used when the guard is too big for narrow rip cuts. We appreciate the antiglare surface on the tape ruler that measures the distance from the blade to the fence.
This limited-time offer applies only to the purchase of $500 or more of Whirlpool, Maytag, KitchenAid, Amana, Samsung, LG, Frigidaire, Frigidaire Gallery, Frigidaire Pro, Electrolux, Ge, Ge Profile, Ge Café, Haier, Haier America and Bosch appliances. Products that are not appliances are not part of this offer, so delivery must be paid. This limited-time offer applies only to the purchase of $500 or more. It includes the delivery of appliances in a 35-km radius of the participating store and the basic installation, which includes levelling and plugging in washing machines, dryers, refrigerators and ranges, if applicable; as well as the pickup of used appliances on the basis of “1 used appliance pickup for 1 new appliance purchased”. The service includes no carpentry or plumbing work, no wall hanging nor plugging in gas appliances. The used appliance pickup is only applicable to appliances owned by the client. The client must provide a safe way for delivery personnel. Delivered appliance waste materials will be handled by our delivery team. Delivery delays may vary by region, by store or by appliance model. Certain conditions and restrictions apply. See your participating store for more details and to ensure this promotion is available in your area. This promotion may be terminated at any time without notice. Details in participating stores. IMPORTANT NOTE: In the context of the COVID-19 and to ensure the safety of our employees and clients, the delivery conditions can vary. Amongst other things, the deliverer may need to leave the items outside. See here details in this regard: https://www.rona.ca/documents/Covid%2019_Change_in_delivery_process_faq.pdf. Delivery delays may vary by region, by store or by appliance model. Certain conditions and restrictions apply. See your participating store for more details and to ensure this promotion is available in your area. This promotion may be terminated at any time without notice. Details in participating stores.

the best contractor table saw


Along with thinking about how the table saw will be used now, it is important to also consider how you will be using it in the future. Will your usage increase or decrease? Many woodworkers may turn a hobby into a fulltime profession if they are talented at what they do. Why are these considerations important? Because they will give you better insight into the kind of money you should spend on your table. If you are going to go into business for yourself in a year or two, spending the money for a high-quality table now is a good idea. It will save you from having to buy another table in the future to accommodate your new needs as a business rather than just a hobbyist.

dw745 table saw

×