You’re going to get everything that you’ll find on the DeWalt DW745 and a whole lot more. For starters, you get much better rip capabilities – 32½” to the right of the blade and 22” to the left, thanks to the bigger table size (21⅞” X 26⅜”). It uses the same 10” 24 tooth carbide blade, but on the DeWalt DWE7491RS, the speed has been increased to an impressive 4 800rpm.
A splitter is a piece of metal that keeps the blade from binding in whatever material you are cutting if the saw kerf starts to close up. The splitter is vertical and sits directly behind the blade. This plays a big part in preventing kickback and should be mounted on the motor assembly so it rises and falls with the saw blades movements. You can also get splitters that can be adjusted to fit the width of the kerf.
However, thanks to the innovative safety technology incorporated into the design, you’ll never have to worry about incurring severe injury. The tool is capable of sensing human touch and will shut down within milliseconds of accidental contact. You’ll be able to work in a safe and clean space with no worries if you invest in the best quality tool like the SawStop table saw.

best table saw dust collection


The Skilsaw worm drive table saw is considered the first ever brass-geared drive table saw. It is designed to provide maximum power and torque with its powerful 5.0 horsepower motor. This table saw is compact and portable with a solid construction. It has a 25-inch rip capacity and 3- ½ inches depth of material. The Skilsaw worm drive table saw has a self-aligning rip fence with an on-tool storage system. But despite being able to handle tough cutting jobs it stays lightweight at only 49 pounds. You can take the Skilsaw Portable Worm Drive Table Saw anywhere at any time.
Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

best table saw under 400


Another important safety feature to consider is a magnetic switch. Magnetic switches are there in case of power cuts or outages and will also protect the table saw motor from over load. Effectively it will switch off the power supply the instant the power goes off ensuring you don’t have a saw blade spinning away in the dark! As you can imagine this is a very useful and must have safety feature when looking to purchase a new table saw.
At a compact 45 pounds, the DEWALT DW745 Compact Jobsite Table Saw is the lightest table saw in our review. The saw's portability doesn't mean that ripping size is compromised, though. Thanks to extending fence guides, you've got 20 inches available. Depth of cut is on par with many bigger machines: at 90 degrees, it's 3 1/8 inches. At 45 degrees, it's 2 1/4 inches. Power comes from a 15-amp motor with a no-load speed of 3,850 RPM. This is ample enough for serious DIY projects and light-duty construction site work.

best table saw brands


While a 50-inch rip capacity might be essential for processing full sheets of wood – common in building tabletops – most projects will do just fine with the 24-28 inches of rip capacity provided by portable and contractor’s table saws. Unless you’re planning on building large furniture or building houses, sticking with any table in the 25- to 35-inch rip capacity range is a safe bet.
The worm drive gearing in the SKILSAW SPT70WT-01 creates maximum torque and power for cutting through any medium. You can feel the torque, as this saw doesn’t ever bog down, even when pushing your material through quickly. The max RPM of 5300 isn’t the best on the market though. The arms do extend to allow for a 25-inch rip with the fence, which is nice.

So what should you do? The good news is, you don’t need to rely on budget tools to get you through your projects anymore. All you need to do is set aside some time to do some research and investigating so you can find a tool that truly fits your needs. And luckily for you, we’ve taken the time to compile a list of the top 10 best table saws that you can invest in for your woodworking projects.


There are some procedures, like cutting dados where you will be required to remove the safety guard. What happens too often, is that people neglect to put the safety guard back again. The time it takes to remove and replace the safety guard can become a bother, but living for the rest of your life, missing a finger or two is much worse. Back to that phrase that I mentioned earlier: don’t become complacent and always follow the rules.
A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades.
Changing a table saw blade may seem daunting, but it’s actually fairly simple and straightforward. You just need to keep a few safety precautions in mind and have the right tools You’ll need to start by making sure your table saw is off. Unplug the device and make sure that when you press the ‘on’ button the blade doesn’t spin. Now that you’re certain the area is safe, it’s time to start. You’ll want to find a screwdriver set and the spanners that came with your table saw before you get going.

miter saw


Although both DEWALT DW745 and DWE7480 have similar features like 120 voltage power supply, 10 inches blade diameter, 5/8 inches arbor size, 2.5 inches dust collection port and similar maximum cut depth, there are few differences between them. Modular guarding systems are available in both these models which can give you efficiency while setting up the tools.

ridgid table saw


A lot of the modern table saws nowadays will have a dust collection port where you can hook up a vacuum or extraction system to it. We would always recommend that you purchase a table saw with a dust port, always check the size of the port to make sure it fits with either your vacuum or your extraction system, or you can always modify something to make them fit.


We spent a lot of time setting up and taking down the saws to see how well the stands worked and how easy it was to install and remove the blade guard and anti-kickback pawls. Then we ran a torturous ripping test with 3-in.-thick slabs of oak to find the best table saw. And finally, we used the saws for more conventional tasks like cutting plywood and ripping framing lumber as another test to determine the best table saw. 

dewalt 8 1/4 table saw

×