With a 32½-inch rip capacity and motor capable of up to 4800 rpm, the DWE7491RS is more than prepared to effectively deliver 3⅛-inch deep cuts to thick slabs of wood. Happy customers sing this machine’s praises, reporting that it’s as sturdy as a table saw can get — plus, it’s easy to use, and assembling it is a cinch. They do however note that workers looking to produce finer cuts should seek out a replacement blade since the one provided is more suited for fast, rough work.
If you’re working out of your garage, you may not have room for a full-size, standalone table saw. There are several tabletop models available that provide a smaller (and typically less expensive) alternative with the same wood-cutting capabilities. However, if you do have room for a full-size model, these are generally more versatile and powerful.
We spent a lot of time setting up and taking down the saws to see how well the stands worked and how easy it was to install and remove the blade guard and anti-kickback pawls. Then we ran a torturous ripping test with 3-in.-thick slabs of oak to find the best table saw. And finally, we used the saws for more conventional tasks like cutting plywood and ripping framing lumber as another test to determine the best table saw.
After spending hours doing a lot of research and talking to professionals who use these tools on a regular basis we have put together a review for you that not only tells you three of the top table saws on the market today, but we tell you why they are popular and explain a bit about each so you have a good idea of what they are like. This table saw review will put much-needed information right at your fingertips so you can make a good decision on the right table saw for your needs.
The three main factors to take into account when looking at table saws are known as “the three Ps”: Power, Price, and Portability.   Depending on what your particular needs are at a given time, you can shift the emphasis between these three factors. ​This will help you decide how you’ll use the power saw, and then let you focus on the most important table saw features needed.

best table saw portable


The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.
It runs off of a powerful 15 amp motor that enables it to attain speeds of up to 3,850 rpm and has a 20 inch rip capacity. It also has a handy dust storage port to help it stay more productive and efficient by keeping the space clean. You’ll enjoy working with this remarkable tool if you’re constantly on the move and will be able to use it for many years to come thanks to its sturdy design.
There are three areas of importance that you’ll need to protect – your ears, eyes, and arms. To start with, you’ll want to make sure that you have a pair of earplugs or noise reducing headphones that will help to minimize the negative effects of being exposed to loud noise for prolonged periods of time. While this may seem like a small solution, it is something that you’ll want to make sure you take into full consideration – to avoid doing so could be extremely detrimental to your overall health.
How big a table saw is, is determined by the largest blade the saw will hold. 8” blades are the smallest that should be used for any home workshop. You can get blades in 9”, 10”, and 12” sizes as well. Most workshops will not really need the 12” blade as this has a very deep cut capability, but for construction firms and larger, commercial shops, the 12” comes in handy.
Finally, hybrid saws combine the lighter weight of the contractor saw with the more powerful motor and sturdier construction of the cabinet saw, at a price that’s easier for the occasional woodworker to stomach. They can run about $1,200 or so, and weigh in at under 300 pounds. Their motors are generally in the 1.5 to 1.75 HP range, and can be used with standard 110V outlets.
That being said, it is a very basic model. It has great features and is built to the outstanding quality standards of any DeWalt product. Though it doesn’t have all the features that you’ll get on more expensive products from DeWalt or other reputable brands. When I say more expensive, I’m talking about a couple of hundred dollars. So for that reason alone, many of you will take the DeWalt745 over any other. 

best table saw for hobby woodworking


The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.
Apart from the same standard kit that you get with the DeWalt DW745, you’ll also get a rolling stand and 2 blade wrenches. You have the option of also getting a 13/16” dado rail and saw blade combo pack for a few dollars more. For most people who want an affordable good quality table saw to use around the home for DIY and hobby projects, the DeWalt DW745 is an unbeatable option. However, the more serious hobby or professional carpenter will probably have to dig a bit deeper into their pockets and go for the DeWalt DWE7491RS.

cheap table saw


After reviewing and thoroughly examining all the options available to us, we’re confident in our recommendation of the Shop Fox W1819 Table Saw as the best overall table saw for any woodshop. If you’re looking for a more portable option that’s a great value for the money, consider the DeWalt DWE7491RS Table Saw. It’s a great combination of power and portability for woodworking hobbyists that’s also suitable for the jobsite.

harbor freight table saw stand

×