This “review” is a giant nothingBurger. There is not one scrap of objective comparison between these saws. Because you sell them, they’re all great and will all zip right through “the hardest woods”. Bulll$hit. You did not test, compare, analyze, or use ANY of these saws. Re-hashinf manufacturer specs is a “Roundup” but it certainly is not a review. Typical sales pablum.

best portable table saw under 300


Metabo HPT Table Saw C3610DRJQ4M offers users the power of a corded saw and the freedom or a cordless platform. The corded-cordless Table Saw produces the power and portability that’s needed on a jobsite. The Multivolt Saw accepts a 36V battery or plugs into an outlet with the AC Adapter. With additional features like soft start, large table saw size, and a rip capacity of 35″, it comes as no surprise that the award-winning saw is on our list.


The Craftsman table saw is one of the most compact of the bunch when it’s folded up. And if you can get it for the sale price of $260, it’s also the cheapest of the best table saw options. The blade guard and anti-kickback pawls are identical to the Porter-Cable and are the hardest of any of the saws to install. And they are the only two blade guards that don’t have a feature to hold them out of the way when you’re adjusting the blade or setting up the cut.
And finally, they all include a blade guard that can be removed and reinstalled without tools. Because a few sawing operations, such as non-through cuts, require you to remove the blade guard, we like saws that make this task easy. The Bosch, DeWalt and Ridgid saws have well-designed blade guards that are easy to remove and reinstall. The blade guards on all but the Porter-Cable and Craftsman also have a feature that holds the blade guard in the raised position to allow better blade visibility for setting up cuts.
The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand. 

kobalt 10 table saw


If you’re working out of your garage, you may not have room for a full-size, standalone table saw. There are several tabletop models available that provide a smaller (and typically less expensive) alternative with the same wood-cutting capabilities. However, if you do have room for a full-size model, these are generally more versatile and powerful.
Each of the following three styles of table saw is designed with a certain type of user in mind. Whether you’re a first-time woodworker, dedicated hobbyist, or professional construction worker, there’s a table saw out there for you. Before we get into the nitty-gritty of what makes a great table saw, we need to discuss the different types of table saws that you might consider purchasing.

ryobi table saw review


Once you’ve made sure that the table saw is unplugged and there aren’t any extra materials in your workspace, you should turn your attention to the miter slot. See also related: Top 10 Miter Saws here. You’ll want to make sure that the miter (click here for sliding miter saws) slot is parallel to the blade. It is important that all measurements are precise and exact – nothing short of parallel will do. Once you’ve measured the blade and the miter slot, you’ll need to check the fencing as well.
The blade material is another important factor to consider when shopping for the best saw blade for your table saw. When it comes to choosing the right material, there are two aspects to consider. You should know about the material of the plate as well as the material used to make the teeth of the blade. All saw blades are not created equal. There are cheap saw blades that won’t deliver the results you expect from your woodworking projects. Don’t scrimp on the blade when you have invested a significant amount of money on a quality table saw. Some of the highest quality saw blades are made from laser-cut steel and the teeth are made of C4 grade carbide using microscopic grains.
Contractor saws weigh quite a bit more than portable saws, averaging between 150 and 350 pounds, but are still somewhat portable. They have a heavier, cast iron table top, and a motor that is usually more powerful than a jobsite saw. Even so, they’re within prices affordable for more committed hobbyists. Contractor saws can range between $800 and $2,000. They’re good for basic cutting tasks, as well as making home furniture and cabinetry work.

best table saw crosscut sled


Often called benchtop, jobsite, or worksite saws, portable table saws are typically made of lightweight materials, such as an aluminum table top, so that they’re easy to move from place to place. Sometimes they’ll have wheels attached to make shifting them around even easier. The motors on portable saws are also much smaller than on other types of table saws, and are typically less powerful.

best table saw for your money


Unfortunately, nothing seemed to be completely aligned from the factory, so right off the bat, we got cuts that were far from straight. After quite a bit of adjusting and fiddling, we managed to get some pretty decent cuts, though not the cleanest or straightest of the saws we tested. We also weren’t thrilled about how long the blade took to slow down once the saw was powered off. Sometimes you want to turn the saw off, adjust your piece, and make a new cut. When the blade just continues spinning, it starts to reduce your productivity.
The Powermatic 1.75HP Table Saw provides top speed power that professional contractors require for large and small construction projects. With 3,800 RPM, users can quickly complete tasks. The Powermatic Saw increases precision with miter gauge micro adjustment capabilities. For added protection, the Table Saw features an extraction port that keeps particles away from the user’s face, and comes equipped with Accu-Fence technology, which keeps the tool securely in place. For tool-free changes, both the riving knife and the blade guard feature quick-release mechanisms.
Meanwhile, the most updated Ridgid table saw boasts of a heavy duty portable body with stand. This has a 15-amp motor with 4000 rpm. This is an updated table saw that provides a single-point release for simple assembly and disassembly. This Ridgid table saw offers an onboard storage system for your miter gauge, blades, rip fence and other important accessories. This is a handy, compact and portable power table saw you just might need in your workshop or worksite.
A lot of the modern table saws nowadays will have a dust collection port where you can hook up a vacuum or extraction system to it. We would always recommend that you purchase a table saw with a dust port, always check the size of the port to make sure it fits with either your vacuum or your extraction system, or you can always modify something to make them fit. 

table saw blade


One of the biggest issues and potential hazards when working with table saws is kickback. Table saw kickback occurs when wood is ejected from the saw at extremely high speed. You can imagine the sort of injuries this can cause. Table splitters are effectively small vertical bits of metal or sometimes plastic that are designed to stop the wood flying back if there is a kickback.  Attached to the splitter are anti kickback pawls either side, they look like table saw blades themselves but they are in fact there to grip the wood at stick into it in case of kickback.
The Bosch 4100-09 offers many advanced features, making it a very capable table saw for woodworking. The air-filled wheels and gravity rising stand makes this table saw functional and lightweight. Set up and tear down of the table saw is a breeze. This technology allows the table saw to be moved from place to place, even over the most rough and challenging areas of the work site. The 4100-09 weighs 39 pounds, making it the perfect portable table saw. Although it is lightweight, it is very durable and stable.
Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

Rockwell diverged from the crowd with this offering. For starters, the riving knife, anti-kickback pawls and blade guard are connected and remove as a unit. If you do remove them to make a non-through cut, you have to install the separate riving knife first. It’s not difficult, just different. This is the only saw with a right-tilting motor. We prefer left-tilting motors because it’s safer to make bevel cuts with the fence on the right side of the blade. There’s no port for attaching a vacuum cleaner, but there’s a large dust bag that does a good job of collecting sawdust. This saw cuts 3-9/16 in. at 90 degrees, 1/16 in. more than the next closest competitors, allowing you to rip a 4×4 in one pass. And like the Ryobi saw, it has a 30-in.-wide rip capacity.

best thin kerf table saw blade


The worm drive gearing in the SKILSAW SPT70WT-01 creates maximum torque and power for cutting through any medium. You can feel the torque, as this saw doesn’t ever bog down, even when pushing your material through quickly. The max RPM of 5300 isn’t the best on the market though. The arms do extend to allow for a 25-inch rip with the fence, which is nice.
If you are into woodworking even for a couple of weeks, you know the importance of choosing the right saw blade for your table saw. In fact, the table saw is only as good as its blade – even if you have invested in the most powerful table saw. Investing in a low-quality blade is a waste of your time and money because it may ruin your woodworking project by making imprecise cuts. Shopping for the best table saw blade isn’t easy. You should be spot on with your homework when buying a quality saw blade for your table saw. We’ve assembled a comprehensive guide that lets you learn everything you need to know when shopping for the best table saw blade.

It accommodates a clean workspace with its dust port that you can link to the external accessories to keep that messy dust away. The face is great, easy to set up, and in its category, it is the best fence. You can adjust it with accuracy and quickly use the pinion fence rail and the rack. The only complaint is perhaps the miter gauge, otherwise, DeWalt DW745 is the best table saw you could ever have.
Blade guards are an important safety device and should never be removed from the saw. You want to find one that rises up parallel to the table so it is always on top of the material you are working with. The purpose of this blade guard is to protect you from the spinning blade. While some woodworkers find them annoying, the safety they provide is well worth the inconvenience.

best table saw for diy


If the piece of wood that you’re cutting does not have a straight edge to run along the fence guide, you won’t get an accurate cut. An uneven edge will move back and forth against the fence guide. A good way to create a straight edge to work with is to fasten the piece that you’re cutting to a piece of plywood that has a straight edge. Using screws or nails, you can attach the uneven wood to the straight piece, so that the straight edge runs along the guide rail. Make sure that the straight-edged wood is narrower than the width of your intended cut so that you only cut the piece that is intended to be cut.

best vintage table saw


The DWE7490X is a great table saw that guarantees convenience and flexibility thanks to its scissor stand. It has been exceptionally designed with a stand that makes the job easier when setting it up. Also, it combines portability and power into one very convenient table saw. Unfortunately, some will find the 87 pounds a bit of a stretch in terms of carrying it around.
Another excellent choice for the hobbyist or at-home handyman, the SKIL 3410-02 10-Inch Table Saw is a great value, giving you a durable build and quality performance at a wallet-friendly price. It doesn’t have the same brand recognition as some of the more expensive options on this list, but reviewers love this machine and say that it’s perfect for woodworking and DIY projects.

best table saw for hobbyist


The Craftsman table saw is one of the most compact of the bunch when it’s folded up. And if you can get it for the sale price of $260, it’s also the cheapest of the best table saw options. The blade guard and anti-kickback pawls are identical to the Porter-Cable and are the hardest of any of the saws to install. And they are the only two blade guards that don’t have a feature to hold them out of the way when you’re adjusting the blade or setting up the cut.
When it comes to this particular style of saw, power is going to be measured either in amperage or in horsepower. The smaller saws, (Bench-top, Jobsite, Contractor, and some Hybrids) will typically have 15-amp motors, which are 1 to 2 HP (Horsepower). They are going to be able to confidently cut through ​wood that is around 2 inches thick with no problems.
The Porter-Cable looks like a beefed-up version of the Craftsman, with the same blade guard and anti-kickback pawls. This is the only saw in our test with a blade-tilting handwheel, which makes it easier to dial in a precise bevel angle. The motor mount and blade controls on this saw are very sturdy, without much play, which translates to a good-quality cut. Extending the fence for a wide rip requires a bit of effort on this saw, since the rails are stiff. All in all, this is a great saw for the price.

best table saw on a budget


Over the years there are a few popular table saw brands in the market and two of these are the DeWalt and the Ridgid table saws. The DeWalt compact job site table saw is the latest DeWalt table saw model. This has a 20-inch maximum rip capacity that will let you cut through a variety of materials. This table saw is lightweight, portable with a steel roll cage that will protect the tool against drops and impacts. It has a strong 1850 watt motor to give you pure power for almost all applications. This has a cast table top design to improve accuracy and precision.
Coming to the DW745 unit, it is considerably the most sought after model which offers the best value for your money. It is also powerful, easy and flexible to use, and offers enormous rip capacity. The difference in price from the other models makes the DW745 the best for the money option. Meanwhile, you have to bear in mind that the miter gauge is trash and one wonders why DeWalt is yet to fix this bug. So, if you ever have to choose this tool, just get a new miter gauge alongside. Overall, its incredible marriage of power and portability makes it a go-to choice. 
There are two types of motors used in table saws: universal motors and induction motors. With a universal motor, the power source is linked directly to the blade, providing a whole lot of power. The downside is that these models are generally quite loud. Induction motors, on the other hand, are connected to a belt that then transfers power to the blade. As a result, you get quieter operation and the ability to cut dense materials. The downside is that these models require more preventive maintenance, as you have to adjust the belt’s tension periodically. 

best table saw cabinet


The DeWalt DW745 is not their top-of-range job site table saw, but it’s a great competitor among 10” portable table saws. The incredibly reasonable price makes it an attractive option for both woodworking hobbyists and professional carpenters alike. If you find a 10” job site saw any cheaper, take a serious look at whether you’re getting the same quality.

If you’re going to be working with a table saw, you’re going to want to make sure you take a few safety precautions before beginning your work. Sharp, heavy duty tools like a table saw must be handled properly and treated with respect in order to see the best results and maintain a safe environment. Click here to find out the best way to sharpen your blades. Before you begin your safety preparations on the table saw itself, you need to take the time to make sure you are properly dressed for your task.

The miter gauges on these saws range from downright flimsy to cabinet-saw quality. All the saws except the Craftsman and the DeWalt also have T-tracks—a nice feature that captures the miter gauge bar, making it easier to start wider crosscuts. Because the Ryobi and DeWalt saws don’t have a standard miter gauge slot, you can’t use accessories that require a 3/4-in. slot.

If you’re a professional looking for a great table saw for the worksite, you’ll love the features and performance of the DEWALT DWE7480. Equipped with the Site-Pro Modular Guarding System has a rack and pinion telescoping fence rail that will allow you to make fast, smooth and accurate adjustments. This is the perfect table saw for cutting larger shelving and trim easily. With a 15 AMP 4800 rpm motor, you will go through all types of wood, even hardwood, with ease.
Another important safety feature to consider is a magnetic switch. Magnetic switches are there in case of power cuts or outages and will also protect the table saw motor from over load. Effectively it will switch off the power supply the instant the power goes off ensuring you don’t have a saw blade spinning away in the dark! As you can imagine this is a very useful and must have safety feature when looking to purchase a new table saw.

best table saw blade


Balancing heavy-duty durability and lightweight design, this machine proves that good things can come in small packages. While buyers are overall happy with their purchases, they do seem to all agree on one thing: the DEWALT DWE7480 may be an overall investment, but it could seriously do with a miter gauge replacement. Buyers report replacing its inaccurate, plastic gauge for a solid, more detailed one.

The battery operated Milwaukee 2736-21HD Saw relies on a single M18 REDLITHIUM HIGH OUTPUT HD 12.0 battery that generates energy equivalent to a 15 Ah corded saw and produces 6,300 RPM. For the professional carpenter, remodeler, and general contractor, this table saw optimizes for power, productivity, and portability. Included in this machine is the REDLINK Plus intelligence to maximize the performance of your tool and will also protect from overload, overheating, and over discharge. This table saw also features onboard storage for the included accessories, so you don’t have to worry about misplacing them. Keep track of where your saw is on the site with ONE-KEY app and manage the output of how much energy the saw uses from your phone.


The three main factors to take into account when looking at table saws are known as “the three Ps”: Power, Price, and Portability.   Depending on what your particular needs are at a given time, you can shift the emphasis between these three factors. ​This will help you decide how you’ll use the power saw, and then let you focus on the most important table saw features needed.

best table saw portable


One of our favorite features of the device however, would have to be the load speed and maximum cutting depths. The DEWALT DWE7480 Compact Job-Site Table Saw can reach a load speed of 34,800 rpm and can reach a maximum cutting depth of 3 ⅛ inches when working at a 90 degree angle and 2 ¼ inches when working at a 45 degree angle. You’ll love the quick and accurate cuts you’ll be able to make while using this device - it will revolutionize the way you’re able to go about your job.
Belt drive table saw motors run on a pulley system, most of the time some power is lost through this system, but belt drive blades can cut through thicker timber and hardwoods. They can produce power of around 3 to 5HP and thanks to the motor being mounted further away from the blade with belt drive, the motor will last longer as less dust will get into the motor. One thing to consider though is that belt drive will be in general more expensive and are normally found on heavy cabinet type saws, so this must be considered when working out your budget.
The DeWalt doesn’t go above and beyond here but has some standard safety equipment as part of its Site-Pro Guarding System. The Blade Guard Assembly is a standard clear plastic set of guards that allows the wood to be fed to the blade but shields you from putting hands on the exposed blade in a slip. The guards will lock in a raised position when you need to see the blade—for example, when adjusting the blade height—which lessens the temptation to remove this safety feature when it’s in your way.

For those looking for something small, these benchtop table saws are just right. Used by contractors who need portable table saws, they’re suitable for quick placement in vehicles and setting up at project sites. Typically, the unit weighs less than 65 pounds and comes equipped with a universal motor. Depending on the model, some come with handy fences. A fence is the part of a saw mounted parallel to the blade, ensuring safe and fast multiple rip cuts.

portable table saw

×