The worm drive gearing in the SKILSAW SPT70WT-01 creates maximum torque and power for cutting through any medium. You can feel the torque, as this saw doesn’t ever bog down, even when pushing your material through quickly. The max RPM of 5300 isn’t the best on the market though. The arms do extend to allow for a 25-inch rip with the fence, which is nice.

The DeWalt DW745 is not their top-of-range job site table saw, but it’s a great competitor among 10” portable table saws. The incredibly reasonable price makes it an attractive option for both woodworking hobbyists and professional carpenters alike. If you find a 10” job site saw any cheaper, take a serious look at whether you’re getting the same quality.


The Sawstop 3 HP Professional Cabinet Table Saw 3 HP 60 Hz motor for exceptional power and heavily constructed arbor bearings for increased durability. To reduce dulling, the Saw features carbide-tipped saw blade teeth. The durable cast-iron table comes with extensions wings that offer 44 x 27″ of space. Keep your work space clean with the dust collection port that removes up to 99% of dust. Additionally, the tool features the SawStop Safety System that shuts down automatically when skin comes in contact with the blade. Also, the Saw comes with a static dissipative arbor belt that prevents hazardous charges.

The CM8S 8-1/2 inch single bevel sliding compound miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighs only 37 pounds. These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read miter and bevel scales, and detent system provides quick and accurate cuts. The CM8S also has the same crosscut capacity (12-1/4 inch) as a 10 inch miter saw, at 30% lighter weight.
Also designed to deal with the issue of kick-back, ​these type of pawls essentially pin down the cut wood so that it cannot go flying back toward the user. These pawls are mounted above the cutting surface and hang on to the wood through the use of their “claws,” which grab the wood once it has been cut. They prevent it from going anywhere before you’re ready for it to move.
Financing available is “Equal payments, no interest” for 24 months (unless otherwise stated) and is only available on request, on approved credit and on purchases of $150 (unless otherwise stated) or more (Gift Cards excluded) made with your Triangle credit card at Canadian Tire, Sport Chek, Mark’s, L’Équipeur, Atmosphere, Sports Rousseau, Hockey Experts, L’Entrepôt du Hockey and participating Sports Experts. Interest does not accrue during the period of the plan. However, if we do not receive the full minimum due on a statement within 59 days of the date of that statement, or any event of default (other than a payment default) occurs under your Cardmember Agreement, all special payment plans on your account will terminate and (i) you will then be charged interest on the balances outstanding on such plans at the applicable regular annual rate from the day after the date of your next statement, and (ii) the balances outstanding will form part of the balance due on that statement. There is no administration fee charged for entering into a special payments plan. Each month during an equal payments plan you are required to pay in full by the due date that month’s equal payments plan instalment. Any unpaid portion not received by the due date will no longer form part of the equal payments plan and interest will accrue on that amount from the day after the date of your next statement at the applicable regular annual rate. Offer subject to change without notice.

dewalt table saw


Ironically, it’s the more experienced carpenters that are more likely to get injured whilst using a table saw. Research has shown that most injuries are reported by carpenters with more than 18 years of experience. The reason for this is complacency, people tend to become more relaxed over the years. So it’s important to maintain a healthy respect for the machine that you’re working with and never forget the possible danger that you face, no matter how proficient you become.

I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.

I appreciate the helpful comparison of the best table saws. I’m fairly new to woodworking, and until recently I was using an old table saw that used to belong to my dad. Long story short, it’s no longer usable, and so I’m looking for a good table saw to buy that’s beginner-friendly. I have my eye on the DEWALT DW745 – evidently it’s really popular and does a great job. I’ve taken a look at some other sites for more ideas. Your guide here is great. What is your opinion on the DW745?

best table saw stand


The model BS5205 4.5 inch band saw is ETL Certified and offers 3 speeds. Engineered for cutting ferrous and nonferrous metals with speed, efficiency and durability. A Solid cast iron saw head frame and vise that opens to 6 inch. Featuring a heavy-duty steel stand with tool shelf plus wheels and handle for easy transport. The BS5205 has a vise that swivels up to 45 degrees, as well as a throat depth of five inches, enabling you to gain more flexibility and control over each project. The Miter gauge allows 90 degrees to 45 degrees cuts. You can set the speed at 80, 120, and 180 feet per minute--whichever best suits your materials and job. It's 1/2 HP motor can easily cut through aluminum to steel.
The CM8S 8-1/2 inch single bevel sliding compound miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighs only 37 pounds. These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read miter and bevel scales, and detent system provides quick and accurate cuts. The CM8S also has the same crosscut capacity (12-1/4 inch) as a 10 inch miter saw, at 30% lighter weight.
If you are into woodworking even for a couple of weeks, you know the importance of choosing the right saw blade for your table saw. In fact, the table saw is only as good as its blade – even if you have invested in the most powerful table saw. Investing in a low-quality blade is a waste of your time and money because it may ruin your woodworking project by making imprecise cuts. Shopping for the best table saw blade isn’t easy. You should be spot on with your homework when buying a quality saw blade for your table saw. We’ve assembled a comprehensive guide that lets you learn everything you need to know when shopping for the best table saw blade. 

flexvolt table saw


Hello, Thank you for your comment. We apologize for any issues our Top Table Saws of 2018 blog post has caused. It was not written to be a comparative review of the different saws but a list of the top saws that we are currently selling. It would be unfair to compare performance of a portable jobsite table saw to a industrial cabinet saw and then also compare them on price. If you would like to read a very good comparative post we suggest you check out ProToolReviews.com. They are not tied to any manufacturers and have a very unbiased opinion.
The model BS5205 4.5 inch band saw is ETL Certified and offers 3 speeds. Engineered for cutting ferrous and nonferrous metals with speed, efficiency and durability. A Solid cast iron saw head frame and vise that opens to 6 inch. Featuring a heavy-duty steel stand with tool shelf plus wheels and handle for easy transport. The BS5205 has a vise that swivels up to 45 degrees, as well as a throat depth of five inches, enabling you to gain more flexibility and control over each project. The Miter gauge allows 90 degrees to 45 degrees cuts. You can set the speed at 80, 120, and 180 feet per minute--whichever best suits your materials and job. It's 1/2 HP motor can easily cut through aluminum to steel.
All of these great features, combined with the cast iron table top make this saw a tool to be reckoned with. The  SKIL 3410-02 10 Inch Table Saw has a 32 inch rip capacity. You’ll be able to easily and efficiently make cuts by implementing their EZ measurement system. All you have to do is line up your wood and focus on doing the work you love. It’s easily transportable, easily adjustable, and easy on your bank account - and really, what more can you ask for in a tool?

Hybrid saws combine the lighter weight of the contractor saw with the more powerful motor and sturdier construction of the cabinet saw, at a price that’s easier for the occasional woodworker to stomach. They can run about $1,200 or so, and weigh in at under 300 pounds. Their motors are generally in the 1.5 to 1.75 HP range, and can be used with standard 110V outlets.

table saw black friday 2019

×