"The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less-robust stand, and after viewing it in a big box store, I was glad to have this one."—Justin Park, Product Tester
With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.
One of our favorite features of the device however, would have to be the load speed and maximum cutting depths. The DEWALT DWE7480 Compact Job-Site Table Saw can reach a load speed of 34,800 rpm and can reach a maximum cutting depth of 3 ⅛ inches when working at a 90 degree angle and 2 ¼ inches when working at a 45 degree angle. You’ll love the quick and accurate cuts you’ll be able to make while using this device - it will revolutionize the way you’re able to go about your job.

Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

best table saw for the money 2018


The Porter-Cable looks like a beefed-up version of the Craftsman, with the same blade guard and anti-kickback pawls. This is the only saw in our test with a blade-tilting handwheel, which makes it easier to dial in a precise bevel angle. The motor mount and blade controls on this saw are very sturdy, without much play, which translates to a good-quality cut. Extending the fence for a wide rip requires a bit of effort on this saw, since the rails are stiff. All in all, this is a great saw for the price.
Pre-calibrated right out of the box, Kreg’s miter gauge is a blessing for the impatient among us. The folks at Kreg know their customers don’t want to waste time preparing their tools — they want to use them! That’s why the KMS7102 boasts positive stops at a variety of the most common angles: so you can begin using your brand new miter gauge straight away.

best table saw cover


This saw/stand combination is the most expensive of the group. But you get some top-end features. The first thing you’ll notice is the stand with its splayed legs that have no wheels in the setup position. You can’t wheel it around, but man is it sturdy, which is great if you’re ripping sheets of plywood or long, heavy boards. Another unique advantage of this stand is that you can easily remove the saw. That makes the saw easy to transport and to use without the stand. But our favorite feature is the patented rack-and-pinion fence that stays perfectly parallel to the blade and is super easy to adjust. If you can afford to spend a little more, we think the DeWalt is hard to beat.
There are two types of motors used in table saws: universal motors and induction motors. With a universal motor, the power source is linked directly to the blade, providing a whole lot of power. The downside is that these models are generally quite loud. Induction motors, on the other hand, are connected to a belt that then transfers power to the blade. As a result, you get quieter operation and the ability to cut dense materials. The downside is that these models require more preventive maintenance, as you have to adjust the belt’s tension periodically. 

chicago electric table saw


We love the Makita Contractor Table Saw for its convenient design and sheer power. The device is powered by a powerful 15 amp motor that enables it to work incredibly well and efficiently. The whole ensemble comes with a superior safety system, a miter gauge, a rip fence, and a 32 inch blade to ensure that you’re prepared to get going and get the job done as soon as you receive the package. We also appreciate the measures taken to protect the blade and machine during transportation like the case that encloses it underneath the table.
How do you know which table saws are the best on the market? With so many table saw choices, it’s hard to know which one is the best fit for you and your woodworking needs. Not for long. We’ve taken the leg work out by doing all the measuring, tracking, and researching for you. We’ve compiled year-over-year performance and pricing information for over 3 years to help you choose the table saw that is ideal for you and your project. Search no more, find the best saw for you below.
The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.
Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

best table saw for the money 2018


If you are into woodworking even for a couple of weeks, you know the importance of choosing the right saw blade for your table saw. In fact, the table saw is only as good as its blade – even if you have invested in the most powerful table saw. Investing in a low-quality blade is a waste of your time and money because it may ruin your woodworking project by making imprecise cuts. Shopping for the best table saw blade isn’t easy. You should be spot on with your homework when buying a quality saw blade for your table saw. We’ve assembled a comprehensive guide that lets you learn everything you need to know when shopping for the best table saw blade.

flexvolt table saw


You often find that many contractors have a love hate relationship with blade guards. Many contractors and woodworkers simply find they often get in the way and can often get wood stuck in them. But many manufacturers are improving these guard’s year on year and now many of them are very advanced and will help keep your fingers from getting hurt, we always advise you to consider the table saw blade feature on any table saw in detail as it could one day help saw you.

best table saw for cabinet making


Another important safety feature to consider is a magnetic switch. Magnetic switches are there in case of power cuts or outages and will also protect the table saw motor from over load. Effectively it will switch off the power supply the instant the power goes off ensuring you don’t have a saw blade spinning away in the dark! As you can imagine this is a very useful and must have safety feature when looking to purchase a new table saw.
Table saws in this best table saw review run the gamut in price and quality. You can buy a table saw for as little as $150, and if you use it just to occasionally rip a board, that may be all the saw you need. If you want a saw that’s easy to carry and you don’t need to rip sheets of plywood in half, look for a “compact” saw like the DeWalt DW745 (shown) or the Bosch GTS1031. If you have room for a little larger saw that’s slightly less portable but capable of wide rips, consider one of the best table saws we review here. And finally, if you want to build cabinets or furniture and have a big enough work area, you can step up to a stationary contractor’s saw like the Ridgid R4512 (shown), for about $650.
One of our favorite features, however, would have to be the built-in safety system. The safety system quickly detects when human contact has been made with the blade by reading the electrical signals that are sent throughout the blade and locks down on the cabinet within milliseconds.The whole process only takes about 1/200th of a second and helps to save craftsmen from devastating injuries every day.
The best portable table saw is going to depend largely on what you need the saw for, however, there are three main types of portable table saws; bench top, compact, and job site table saws. These machines vary in their capabilities, but they are all easy to maneuver and move around compared to their stationary counterparts. If you only need a small saw that will be good for your DIY projects, you can likely get by with just a benchtop table saw.
The SKILSAW SPT70WT-01 is truly a woodworking marvel, packing a 15-amp Dual Field motor into a surprisingly lightweight yet durable 49-pound frame. Whether you’re an amateur carpenter or a contractor with years of experience under his toolbelt, SKILSAW’s workhorse of a table saw is an invaluable addition to your repertoire thanks to its raw torque and unparalleled 25-inch ripping capacity, meaning tearing through thick sheets of plywood has never been easier.
All of these great features, combined with the cast iron table top make this saw a tool to be reckoned with. The  SKIL 3410-02 10 Inch Table Saw has a 32 inch rip capacity. You’ll be able to easily and efficiently make cuts by implementing their EZ measurement system. All you have to do is line up your wood and focus on doing the work you love. It’s easily transportable, easily adjustable, and easy on your bank account - and really, what more can you ask for in a tool?
We spent over 30 hours researching and testing 10 different brands of table saws and found that maximum speed, cord length, and cut depth were most important. The DEWALT DW7480 table saw scored high marks in every category and is our top pick. This 48 pound table saw is perfect for using at home or taking with you to the job site. It has a powerful 15 amp motor and 24” rip capacity that makes it a favorite with everyone. The 2 ½” dust collection port allowed us to connect the saw to a shop vac and reduce the amount of dust that was in the garage.
Dewalt designed an excellent table saw when they created the DW745 and we consider it to be the best buy on the market from our review. The design is fairly lightweight and easy to transport as it only weighs about 45 pounds. Additionally, the device is full of great features that enable it to work with speed and efficiency that you typically don’t see in a portable saw.
The Sawstop 3 HP Professional Cabinet Table Saw 3 HP 60 Hz motor for exceptional power and heavily constructed arbor bearings for increased durability. To reduce dulling, the Saw features carbide-tipped saw blade teeth. The durable cast-iron table comes with extensions wings that offer 44 x 27″ of space. Keep your work space clean with the dust collection port that removes up to 99% of dust. Additionally, the tool features the SawStop Safety System that shuts down automatically when skin comes in contact with the blade. Also, the Saw comes with a static dissipative arbor belt that prevents hazardous charges.

On the other end of the handyman spectrum, you’ve got the seasoned professional with years of experience under his belt. We all know the type: he’s the guy that expects only the best, and DEWALT more than delivers with their patented DWE7491RS. This wood-slicing machine is the cream of the crop when it comes to cutting through even the toughest materials. The DWE7491RS measures 26.25 x 22 inches, so it’s a relatively large apparatus—you’re going to want to make sure that you have plenty of space in your garage for this table saw.

best table saw router combo


How big a table saw is, is determined by the largest blade the saw will hold. 8” blades are the smallest that should be used for any home workshop. You can get blades in 9”, 10”, and 12” sizes as well. Most workshops will not really need the 12” blade as this has a very deep cut capability, but for construction firms and larger, commercial shops, the 12” comes in handy.

best value table saw 2017


Rockwell diverged from the crowd with this offering. For starters, the riving knife, anti-kickback pawls and blade guard are connected and remove as a unit. If you do remove them to make a non-through cut, you have to install the separate riving knife first. It’s not difficult, just different. This is the only saw with a right-tilting motor. We prefer left-tilting motors because it’s safer to make bevel cuts with the fence on the right side of the blade. There’s no port for attaching a vacuum cleaner, but there’s a large dust bag that does a good job of collecting sawdust. This saw cuts 3-9/16 in. at 90 degrees, 1/16 in. more than the next closest competitors, allowing you to rip a 4×4 in one pass. And like the Ryobi saw, it has a 30-in.-wide rip capacity.

best table saw under 1000


The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less robust stand, and after viewing it in a big box store, I was glad to have this one.
The model BS5205 4.5 inch band saw is ETL Certified and offers 3 speeds. Engineered for cutting ferrous and nonferrous metals with speed, efficiency and durability. A Solid cast iron saw head frame and vise that opens to 6 inch. Featuring a heavy-duty steel stand with tool shelf plus wheels and handle for easy transport. The BS5205 has a vise that swivels up to 45 degrees, as well as a throat depth of five inches, enabling you to gain more flexibility and control over each project. The Miter gauge allows 90 degrees to 45 degrees cuts. You can set the speed at 80, 120, and 180 feet per minute--whichever best suits your materials and job. It's 1/2 HP motor can easily cut through aluminum to steel.

best table saw


The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less robust stand, and after viewing it in a big box store, I was glad to have this one.
The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.

kobalt 10 table saw

×